|
|
| (15 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ==About== | | ==About== |
|
| |
|
| Displays the about window | | Displays the about window which includes version number, copyright information etc. |
|
| |
|
| ==Release Notes== | | ==Release notes== |
|
| |
|
| '''DXLog.net release notes'''
| | Links to the [http://dxlog.net/docs/index.php/Menu_Help online release notes]. |
|
| |
|
| Ver 2.4.0
| | ==Online documentation== |
| ------------------------
| |
| Statistics window: new display option added, % difference from target store. (TNX CT1BOH)
| |
| Statistics window: now save selected options in config, and restore when window is reopen.
| |
| QTC receive window: when CTRL is pressed, AGN (F8) message changes and sends row number with
| |
| AGN message. (TNX DF1QR)
| |
| Digi decoder window, new menu option added: Parse full line on click.
| |
| When checked, it will parse full line and sends to other windows for processing.
| |
| For example, in QTC receive window, it will parse full qtc line and populate all fields (utc, call, serial).
| |
| Winkey - fixed issue with additional echo chars received after cw stop and changing radio focus. (TNX N2NT)
| |
| Morse runner emulator - CTRL+Shift+Left/Right - changes pitch level down/up
| |
| QTC Send form - Send all button added. In RTTY, it will send QTC group/number and all QTC's from that
| |
| group/number. (TNX DF1QR)
| |
| Decoder window buttons - right click on button starts button editor. It's possible to change label text, font size,
| |
| background and text colors for each button.
| |
| Decoder window buttons - tooltip text shown when mouse cursor is positioned over button. Tooltip shows button shortcut and
| |
| label text as well as button message macro content.
| |
| Antenna controller window title text fixed. (TNX CT1ILT)
| |
| New cw abbreviation option - custom mode. User can set own translation table for serial number. (TNX YT6W)
| |
| TRC DIGI contest supported.
| |
| Fixed custom ICOM commands (TNX SM7IUN)
| |
| YU DX Contest - new rules for multipliers (K1XM, TNX YT7M)
| |
| Fix non-Winkey stop and quickly start CW sending (K1XM, TNX N2NT)
| |
| Eliminiate incorrect "INVALID MULTIPLIER" messages in contests with two exchange possibilities such as RDXC. (K1XM)
| |
| Add pipes for OTRSP and WinKey devices which support them such as the YCCC SO2R Box. (K1XM)
| |
| Add Reset Interfaces tool menu item, Ctrl+Alt+R, text RESET. Closes and re-opens serial port and pipe connections to
| |
| radios, keyers, SO2R devices etc. Same as entering Configure Interfaces and clicking OK. (K1XM)
| |
| WinKey improvements. New dialog to set keyer type, autospace, reverse etc. Handle paddle interrupt, speed pot.
| |
| More robust handling of speed changes during messages. Don't hang if half-space seen. Don't drop PTT on spaces. (K1XM)
| |
| Cosmetic improvements to Clock form - removed border and context menu setting to set top bar color. (E71DX)
| |
| Removed distractions from Extra information form - full file path replaced with filename and removed number of lines. (E71DX)
| |
| Removed borders on left and right side of the main screen. (E71DX)
| |
| Cosmetic improvements to main toolbar - removed unusable grip and rounded corners. (E71DX)
| |
| Removed margins from top menu bar - reverting to system default behavior using less screen spac. (E71DX)
| |
| Morse Runner integration improvement - transmit will not be interrupted if pressing an F-key (and only F-keys) while the
| |
| radio is in TX mode. (E71DX, TNX IK4ZGO & Z33RW)
| |
| Changed appearance of the Load contest at startup function - removed subitems from menu. (E71DX)
| |
| Provide immediate Auto log backup status in toolbar with checkbox. (E71DX)
| |
| Under the hood cleanup - removing unused libraries and components. (E71DX)
| |
| Don't crash if a wrong-mode QSO is in the log and the call is entered. (K1XM)
| |
| Added new option under File -> Open configuration directory to open DXLog.net configuration files directory.
| |
| (E71DX, TNX SM7IUN)
| |
| If in SO2R and S&P window does not have focus do not try to change focus when the callsign is deleted by changing the
| |
| VFO frequency (K1XM, TNX K6MR)
| |
| Don't lose the first letter of the callsign or the exchange for local spots in the bandmap after restart. (K1XM, TNX K6MR)
| |
| Keep the setting Bandmap->Add with SPACEBAR across stop/start and RELOAD. (K1XM, TNX K6MR)
| |
| Many fixes to Cabrillo import. Cabrillo V2 is handled better. Error handling is improved. Contest files for several
| |
| contests have been fixed. (K1XM, TNX SM7IUN)
| |
| Resizable windows can be locked, so their size can't be changed by right clicking on them. This minimizes the border around
| |
| the window and enables to use more space on screen and also to make windows look more uniform. (E71DX)
| |
| Cosmetic improvements to bandmap. Removed borders inside the window to use more of the available screen space. (E71DX)
| |
| Shipping new, updated (reduced) list of DX Cluster nodes for new installs. (E71DX, TNX M0CKE)
| |
| Fixed error when trying to delete the last remaining rotator. (E71DX, TNX OE3REC)
| |
| RIT control added for ICOM v2 radios (i.e. 7600, 7700, 78xx, 7610 & 7300) including $CLEARRIT macro command. (SM7IUN)
| |
| Keyboard RIT and frequency adjustment step size increased to 20Hz from 10Hz. (SM7IUN)
| |
| Improved Shift-Up/Down key VFO control. RIT in Run, frequency adjustment in S&P. Works for all operating techniques. (SM7IUN)
| |
| Don't show antenna selection or rotator window menu items if they are not configured. (K1XM, TNX M0CKE)
| |
| Support for IC-7610 including voice keyer (7 memories) and transceive CAT auto messages. (Known issue: Internal DVK
| |
| can only be interrupted by DXLog for the first few seconds due to limitations in ICOM CAT protocol. Recording not supported.) (SM7IUN)
| |
| Improved user experience with IC-7300/7600/7700/7800/7850/7851 when using transceive CAT auto messages. (SM7IUN)
| |
| Support for built-in voice keyer with IC-7300/7850/7851. (First 7 memories) (SM7IUN)
| |
| Support for FT-817ND and FT-818, including RIT. (SM7IUN)
| |
| RIT support added for FT-847D and FT-857. (SM7IUN)
| |
| Support for Elecraft KX2 and KX3, including internal voice keyer record and playback. (SM7IUN)
| |
| Fixes for antenna selection and rotator control when an antenna server is not used. (K1XM, TNX M0CKE)
| |
| Add WKSETUP or WKEY commands, other minor fixes. (K1XM, TNX M0CKE)
| |
|
| |
|
| Ver 2.3.17
| | Links to the [http://dxlog.net/docs/index.php online documentation]. |
| ------------------------
| |
| SloVhf.net posting live score implementation fixed. (TNX E77DX/OE1EMS@OE1W)
| |
| ADIF export STATION_CALLSIGN added as export field. Also, OPERATOR field is populated
| |
| with same information if operator wasn't logged on during logging time in DXLog. (TNX YT9TP)
| |
| Yaesu FT-991 support added.
| |
|
| |
|
| Ver 2.3.16
| | ==Use Google to search for support== |
| ------------------------
| |
| Winkey init bytes changed to work correctly with Flexradio.
| |
| ARRL DX contest config Cabrillo output fixed for Multi op stations. (TNX OM3BH)
| |
| Flexradio API included used for sending spots.
| |
| New menu option added: Commands->DX Cluster->Send spot to SmartSDR.
| |
| When checked, it will send all spots and bandmap additions to SmartSDR bandmap.
| |
| Replaced SortedList object with Dictionary because of regional settings and threading issues.
| |
| Russian WW RTTY Contest received oblast field was read only. Fixed. (TNX 9A9A)
| |
| EA RTTY Contest in M/M category, serial numbers added per band now. (TNX 9A9A)
| |
|
| |
|
| | Allows you to enter search terms for searching the online documentation and support forum. |
|
| |
|
| Ver 2.3.15
| | ==Use Perplexity AI to search for support== |
| ------------------------
| |
| Cabrillo/EDI export encoding changed to allow ASCII 8bit charset. (TNX SM5SIC)
| |
| Wednesday mini contest config changed according to the rules. (TNX RM2D, R9IR)
| |
| If autosending is turned on and esc key is pressed before autosending is activated, it will be disabled
| |
| until callsign field is cleared. (TNX RM2D)
| |
| DXCAnn window holding ALT when clicking on spot will send spot to inactive radio in SO2R mode. (TNX IK2NCJ)
| |
|
| |
|
| Ver 2.3.14
| | Allows you to enter a question for Perplexity AI which searches the online documentation and support forum. |
| ------------------------
| |
| New entry screen layout added.
| |
| Entry lines can show listening status
| |
| CW text can be visible during TX time.
| |
| TX border added. When station TX, TX border is visible around entry line.
| |
| QSO entry line always starts from radio 1 or 2, not from log anymore.
| |
| CQ Vojvodina contest rules implemented. (TNX YT3W)
| |
| Scottish DX Contest rules implemented. (TNX YT3W)
| |
| DMC RTTY contest rules changed. (TNX OH3P)
| |
| Bandmap line color added in bandmap color properties. (TNX G3BJ)
| |
| Club tag added in live score posting xml. (TNX K6MR)
| |
|
| |
|
| Ver 2.3.13
| | ==3830scores.com== |
| ------------------------
| |
| RSGB FD contest rules changed. (TNX M0CKE, G4IRN)
| |
| RSGB UKAC contest rules changed. (TNX M0CKE, G4PIQ)
| |
| More fixes added in DXL antenna server functionalities. Now Arduino based equipment supported. (TNX K1LZ, K3JO and JT5DX team)
| |
| Elecraft K3 cw rev and data rev modes are now recognized from CAT. (TNX G4BWP)
| |
|
| |
|
| Ver 2.3.12
| | Links to the [https://3830scores.com 3830scores.com website]. |
| ------------------------
| |
| Helevetia contest new rules added. (TNX HB9CAT, HB9DUR, IK2NCJ)
| |
| DXCluster line parser fixed when longer callsign is spotter which causing non fixed data structure. (TNX RM2D, DJ1YFK)
| |
|
| |
|
| Ver 2.3.11
| | ==Commands== |
| ------------------------
| |
| SO2V mode when tx on 2nd vfo, entry focus was always switching back to first entry line. Fixed. (TNX N7TR)
| |
| YU DX Contest new rules added. (TNX YT3W, YU1DW, YU1EW)
| |
|
| |
|
| Ver 2.3.10
| | Opens a searchable list of all menu items. |
| ------------------------
| |
| When visible in log lines, operator name and frequency wasn't refreshed until scrolling wasn't activated. Fixed. (TNX G4IRN, 9A3OS)
| |
| Some fixes added when ESM mode is used in combination with SHIFT binding to opposite radio and RST hidden. (TNX LZ5VK)
| |
| New language available: Norwegian. (TNX LB3RE)
| |
| IARU 2m contest added as new contest. (TNX M0CKE)
| |
| EUHFC and SCC RTTY Contest Cabrillo output adjusted according to the current rules. (TNX S57AW)
| |
| New contest supported: RSGB International DX contest. (TNX M0CKE, EI3JE)
| |
| Alt + space grabs last known callsign from digi decoder window if exists. Otherwise, works as before, grabs call from partner window. (TNX K3JO)
| |
| $OTRSP=x macro implemented. Send custom commands to OTRSP device. (TNX K3JO)
| |
| ARI DX contest config changed to new rules. (TNX IK2NCJ)
| |
| When contest with periods was active, radio 2 entry line period wasn't updated correctly. Fixed.
| |
| QSO editing, problem with qso editing, when dupe qso existing in the log after edit qso. Multiplier wasn't updated correctly. Fixed. (TNX IU3AZC)
| |
| UBA PSK63 config adjusted to new rules.
| |
| NAQP/NASprint config changed for new rules. (TNX W9PA)
| |
|
| |
|
| | [[image:helpcommands.png]] |
|
| |
|
| Ver 2.3.9
| |
| ------------------------
| |
| CWAUTO text command now opens CW autosending dialog. (TNX R9IR)
| |
| New option available: Options->Interface specific options->Automatically open/close digi window on mode change.
| |
| Usable in multi mode contest. When checked, it will automatically open digi mode window when mode is changed to some digital modes.
| |
| Also, when mode is changed to some non digital mode (for example cw/ssb), it will close digi mode window immediately. (TNX IU4AZC)
| |
| DXC spot mode is now also checked in the spot comment. If correct mode is parsed from the comment, it will be associated with the spot.
| |
| Otherwise, DXLog will check for the mode from bandplan.
| |
| When MMVARI is used as decoder, carrier frequency and NET/AFC state is stored in the config and restored when digital window is reopened. (TNX IU4AZC)
| |
| Some fixes included in SA SPRINT config file according to the rules. (TNX K6MR)
| |
| New config option available: DXC_COMMENT_EXTRACT.
| |
| It can be configured to extract some exchange / multiplier information from this field.
| |
| Used for IOTA contest to extract IOTA reference from DXCluster comments. (TNX EI3JE)
| |
|
| |
|
| Ver 2.3.8
| | ==Contest rules== |
| ------------------------
| |
| Multiple keyboards can be used for SO2R(V) mode. Check Options->Keyboard selector to assign separate keyboard for each
| |
| entry line. (TNX CT1BOH)
| |
| Live score qso/mult breakdown posting can be turned off. In that case only totals are posted.
| |
| Live score https / authenticated posting is implemented.
| |
| SQLite dll's changed to statically linked version and upgraded to latest version (1.0.102).
| |
| Live score auto posting period was always 5 minutes. Fixed to accept change to different value. (TNX IK2NCJ)
| |
|
| |
|
| Ver 2.3.7
| | Links to a web page with the current contest's rules. Not available for all contests. |
| ------------------------
| |
| Mode edit commands in logged qsos was broken for digi mode qsos. Fixed. (TNX IU3AZC)
| |
| Live score post http address can be adjusted to different value if needed. (TNX K6MR)
| |
| FT1000 and FT920 new code is finally fixed and tested with real radio. (TNX OE1EMS, DL8BH)
| |
| New contest supported: SA-SPRINT. (TNX LU5DX)
| |
| New features implemented for LZ HF Field contest. (TNX K1LZ)
| |
| TCP/IP connection client ip/name expanded from 16 to 100 chars to allow entering fully qualified domain names. (TNX IK2JUB)
| |
| CTRL+ALT+G (or AltGr + G) introduced as shortcut for sending message to ON4KST.
| |
| Rit moving with Shift UP/DOWN keys wasn't working correctly for Kenwood radios. Fixed. (TNX M0CKE)
| |
| New option added: Edit->X-QSO flag (CTRL+X shortcut). Used to change the status of XQSO flag.
| |
| It can be used to mark QSO in the log as X-QSO. Such QSO, when marked, wouldn't be counted in the log and will be exported
| |
| in Cabrillo as "X-QSO:" line. QSY timers and double QSO checks wouldn't calculate this QSO. Flag is propagated as network
| |
| change, so all networked PC's will see the same picture.
| |
| IARU HF Championship worked HQ's window implemented.
| |
| IARU HF Championship HQ mult calculation is based on DXCC. This means if same HQ reference is used for different HQ stations,
| |
| it will be counted properly. Exceptions of this rule are R1, R2, R3 and AC multipliers, which counts only once per band.
| |
| DXCC for HQ mult is visible in worked HQ's window.
| |
| Worked grid square map is added.
| |
| IARU HF Championship HQ prefill database updated (TNX M0CKE, YT3W)
| |
| ADIF import changes: multiple files can be selected for import, added options for ignoring duplicate qsos during import and sorting
| |
| log by qso date/time after new qsos are imported. (TNX DK8ZZ)
| |
| New option available: File->Merge logs. Different DXN log files for same contest and callsign can be merged into single log file.
| |
| New option available: Options->Log->Show date in qso lines. When checked, it will display qso date in log qso lines just as
| |
| read only information. (TNX DK8ZZ)
| |
| Database save time is fully optimized. Data saving is much faster now.
| |
| Network synchronization protocol optimized. Allows couple of time faster synchronization of big logs through the network with
| |
| reduced CPU on receiving side due different thread usage.
| |
| SCWC database updated. (TNX YT7M)
| |
| Custom country file (for example R150S.dat) can be used if defined in config file. DXCC_DB_TYPE should be defined as CUSTOM_CTY.
| |
| In that case, selection in Options->Data files->Country files will be ignored, and country file defined in config file will be used.
| |
| CQ-M contest: changed country file to R150s.dat.
| |
| RRTC contest: changed country file to R150s.dat.
| |
| RRTC contest: added support for field team operating side. (TNX UA4FER, R9IR)
| |
|
| |
|
| Ver 2.3.6
| | ==Contest web== |
| ------------------------
| |
| EUFF Green party contest renamed to WWFF Green party. Config adjusted for new rules. (TNX 9A1AA)
| |
| New contest supported: ARI sezzione contest. (TNX IU3AZC)
| |
| IOTA contest config file updated to current rules. (TNX M0CKE)
| |
| Yaesu cat protocol for FT-920, FT-1000MP, FT-1000MKV radios fixed. (TNX DL8BH, IU3AZC)
| |
| ADIF Export/Import APP specific fields are automatically included in export and/or import when specific entry
| |
| field isn't clearly connected to some other value (for example CQ Zone). In that case DXLog.net will export field values as
| |
| APP_DXLOG_RCVD, APP_DXLOG_RECINFO, APP_DXLOG_RECINFO2 and APP_DXLOG_RECINFO3. Also, in import procedure, if such fields exists
| |
| in ADIF file, they will be imported in corresponding field in the log.
| |
|
| |
|
| Ver 2.3.5
| | Links to the main web page for the current contest. Not available for all contests. |
| ------------------------
| |
| When "shift binds to opposite radio" is checked, SHIFT+Fx keys doesn't activate message editor. Instead, it is starting
| |
| message sending on opposite radio. (TNX SM5AJV)
| |
| Multiplier list can be refreshed when focused radio is changed. Check Tools->Data entry menu to enable it. (TNX E77DX, CT1ILT)
| |
| Support for Yaesu FT-920 implemented.
| |
| Optimized cat protocol for some Yaesu radios.
| |
| Support for ICOM IC-7300 implemented.
| |
| Bandmap drawing optimized when displaying frequencies close to lower band edge.
| |
| New Microham locking commands implemented. (TNX OM7ZZ)
| |
| In SO2R mode, repeat was stopped when bandmap entry was selected at opposite radio. Fixed. (TNX RT9I)
| |
| | |
| Ver 2.3.4
| |
| ------------------------
| |
| New contest supported: Volta RTTY. (TNX YT3W)
| |
| DXCC searcher function updated to supported callsign combinations with multiple additions (for example xxx/QRP/P).
| |
| ARI DX Contest cabrillo output fixed for Italian and non-Italian stations. (TNX IK2NCJ)
| |
| New option added: Operating->Bandmap->QSY opposite radio instead of 2nd VFO. Default not checked.
| |
| When checked, it will move through bandmap at opposite radio when pressing CTRL+ALT+UP/DOWN instead of using same radio
| |
| 2nd VFO. For example, when focus is at Radio1 line, it will QSY Radio2. And opposite, when focus is at Radio2 line,
| |
| it will QSY Radio1 line. (TNX RT9I)
| |
| | |
| Ver 2.3.3
| |
| ------------------------
| |
| New option added: Options->Interface specific options->Round freq to nearest kHz when sending from macro.
| |
| If checked, it will round frequency to nearest kHz when macro command is used to send a frequency (for example in $FREQOR macro).
| |
| Default is not checked.
| |
| ARRL DX Contest: band change rules fixed. (TNX EI3JE)
| |
| Code for changing buffered CW speed for Winkeyer is optimized now. (TNX CT1ILT)
| |
| $TRx macro behavior fixed when mixed mode contest is used. (TNX OH6KZP)
| |
| Network protocol is changed. Msg number ID added to enable duplicate message identification if network loop happens because
| |
| of some configuration settings. Now, duplicate messages are detected and ignored. (TNX HB9BUN)
| |
| Initialize method in not enabled scripts was called during script instance creation. Fixed. (TNX IK2NCJ)
| |
| When MMVARI is used for RTTY with FSK keying on COM port, if MMVARI window is closed, COM port wasn't properly released which
| |
| caused error when MMVARI window is opened again. Fixed. (TNX IU3AZC)
| |
| New options available: Options->Interface specific options->Radio 1/2 Transverter Offset setup.
| |
| Can be used to set offset for transverter usage in V/U/SHF contest usage. (TNX HB9CAT)
| |
| | |
| Ver 2.3.2
| |
| ------------------------
| |
| ELAM FDM-DUO CAT support added. (TNX M0CKE)
| |
| Rate last 10 and Rate last 100 formula adjusted to correct values. (TNX CT1BOH)
| |
| More fixes added under some scenarios during Morse Runner simulation. (TNX CT1BOH)
| |
| Log qso immediately when $CR macro is found was always executed. Fixed. (TNX CT1BOH)
| |
| Smart correction option implemented. (TNX CT1BOH)
| |
| RSGB UKAC contest 70 MHz band added in configuration.
| |
| Serial number sequence wasn't correct when switching between vfo a/b. Fixed. (TNX IW1QN, IK2NCJ)
| |
| When MMTTY is used in SO2R environment, some parameters (TX port / Radio name) wasn't restored properly
| |
| from shared memory, as same memory segment is shared within multiple instances of MMTTY. Fixed. (TNX IK2NCJ)
| |
| PACC Contest config adjusted according to new rules.
| |
| New contest supported: RSGB International Sprint Contest. (TNX EI3JE)
| |
| New contest supported: RSGB RoLo Contest. (TNX EI3JE)
| |
| ADIF import was broken in previous versions. (TNX 9A1AA, E77DX, DK8ZZ)
| |
| New macro commands available:
| |
| $FREQOR returns frequency of opposite radio in SO2R
| |
| $BANDOR returns band of opposite radio in SO2R
| |
| | |
| Ver 2.3.1
| |
| ------------------------
| |
| Pass mult message text boxes max char limit was set to 16 by mistake. Fixed to allow more characters. (TNX IK2JUB)
| |
| Clear stack message propagated in the network created loop. Fixed. (TNX EI3JE)
| |
| Interlock optimistic method added. When software interlock is used, if blocking allowed response isn't received from all stations requested for
| |
| blocking before timeout, we assume that other stations are blocked and TX is allowed.
| |
| Morse Runner full SO2R simulation available. Special version of Morse Runner is need for this to work.
| |
| Fixed and optimized some timing issues during alternatecq scenario. (TNX CT1BOH)
| |
| Special version of MorseRunner.exe adjusted for DXLog.net usage is now shipped with DXLog.net installation. MorseRunner.exe is started automatically when
| |
| simulation is enabled. If you use SO2R mode, there will be two instances of MorseRunner.exe started. When simulation is disabled, or active log is closed,
| |
| DXLog.net will automatically close MorseRunner.exe processes.
| |
| MorseRunner.exe screens aren't visible by default when simulation is started. CQ WW or CQ WW simulation is started automatically is any of this contest
| |
| files is used when enabling morse runner simulation. If any other contest is used, default simulation is started.
| |
| F1 and F2 CW messages are now sent to Morse Runner, so Morse Runner is sending same message content as DXLog.net.
| |
| RAEM contest, database file added. (TNX R9IR)
| |
| Mult worth and mult counts formula in rate window wasn't calculated correctly. Fixed. (TNX CT1BOH)
| |
| SETUP text command during Morse Runner simulation opens parameters screen instead of configure interfaces screen. (TNX IK2NCJ)
| |
| CTRL+ALT (or AltGr) + PageUP/PageDOWN now changes monitor volume up/down in Morse Runner simulation.
| |
| CTRL+ALT (or AltGr) + LEFT/RIGHT now changes receiving bandwidth in Morse Runner simulation.
| |
| RIT change (SHIFT+UP/DOWN) shortcuts now change RIT in Morse Runner simulation.
| |
| | |
| Ver 2.3.0
| |
| ------------------------
| |
| ALT+F4 changed RUN/S&P mode to RUN, but didn't refresh screen information correctly. Fixed. (TNX 9A3XV)
| |
| New option added: Tools->Data entry->F1 key returns to RUN mode always.
| |
| If checked, it will switch from S&P to RUN mode always when F1 key is pressed. (TNX 9A3XV)
| |
| Network timeout period can be adjusted. Default is 120 seconds. (TNX IK2NCJ)
| |
| Worked DXCC window new information available DXCC expected, spotted and worked. (TNX HB9BUN)
| |
| QSY Wizard smart info available. Each band line is shown in different color if multiplier is needed on the band.
| |
| Also, if mult station is available on the band, line will be marked with different color.
| |
| Click on band line brings Pass a station window with filter on clicked band.
| |
| This can be enabled/disabled in Options->Networking options menu.
| |
| New information added in log lines. If station in qso line is multiplier on some band, it will be shown as warning
| |
| in lines bellow log with information on which band multiplier is needed. Also, it will show possible qsy frequencies
| |
| on the band based on network status information.
| |
| DXLog.net.DXC.exe application is included in main package. This application is used for connection to multiple
| |
| DX Clusters, Skimmers etc. Also, it can be used for tracking of networked radio and synchronizing with local cw skimmer.
| |
| Interlock blocking can be forbidden with clicking on interlock status line in Operating info window.
| |
| Also it can be forbidden with $PILOCK macro, and allowed again with $AILOCK macro commands.
| |
| DXCluster inactivity timeout check process changed.
| |
| If there isn't any traffic received from DXC for 120 seconds, DXLog.net will sent keep alive message (enter key) to DXC.
| |
| If there isn't any traffic received from additional 30 seconds, DX Cluster will be disconnected and reconnecting process will be started.
| |
| DXC client application, new option available: Connect all tabs. It will start connection on all defined tabs. Can be used to
| |
| connect all connections with single click.
| |
| | |
| Ver 2.2.19
| |
|
| |
| UK/EI DX Contest Database and Warning file added. (TNX EI3JE)
| |
| RSGB 6M AFS contest added. (TNX EI3JE)
| |
| Multiple DB prefill files can be used in contest config file to combine data.
| |
| Issue with "ALL" keyword as multiplier data fixed. (TNX K6MR, W9PA)
| |
| CAT interface for Yaesu FT 1000D rewritten. (TNX EI3JE)
| |
| Fixed issues with mode changes when decoder window is opened.
| |
| CW abbreviations wasn't implemented correctly in some SO2R combinations during mixed mode contest. Fixed. (TNX OH6KZP)
| |
| Bandmap mouse scrolling wasn't working when multiple monitors used or when floating mode is used. Fixed. (TNX K6MR)
| |
| If MS VC++ 2010 RTM wasn't installed, some default databases didn't created properly when DXLog.net was first time
| |
| started. This was creating error messages and had to be manually fixed. Now, DXLog.net will fix broken files if possible.
| |
| New interlock type is available: interlock with same station type from status list.
| |
| Multiple interlock options now can be combined. (TNX IK2NCJ)
| |
| Custom prefill database selection is now available. Check menu Options >Data files >Prefill database settings.
| |
| New prefill database type is available: CSV. This allows usage of any CSV type database, for example: N1MM call history databases.
| |
| When bandmap list wasn't sorted by frequency, grab spot up/down wasn't working properly if there wasn't any spot
| |
| selected. Fixed. (TNX LU5DX, M0CKE, S55M)
| |
| CTRL+SHIFT+Up/Down arrow shortcut functionality is changed. Previously, this was used to grab first upper/lower spot, even if spot
| |
| was invalid (worked qso, invalid qso for contest). Now, it is used to grab first upper/lower multiplier spot.
| |
| New option available: Don't prefill exchange in ESM mode when bandmap spot is clicked. (TNX LU5DX)
| |
| DXC Announcements window: multiplier and qso count info is added.
| |
| New option available: Show frequency in QSO lines. If checked, it will show exact frequency for each qso in log lines.
| |
| When ALT+F4 shortcut is used to return to CQ frequency, station is automatically switched in RUN mode. (TNX LU5DX)
| |
| Automatic radio RUN/SP mode switching wasn't working properly in Advanced SO2R technique. Fixed. (TNX K6MR)
| |
| When working S&P, automatic adding of callsign in bandmap in some scenarios also changed focused entry line. Fixed. (TNX K6MR)
| |
| | |
| Ver 2.2.18
| |
|
| |
| New contest supported: UKEICC 80 meters. (TNX M0CKE)
| |
| New contest supported: Irish Radio Transmitters Society Counties Contest. (TNX EI3JE)
| |
| RSGB 80m contest definition fixed and warning info about band segments added. (TNX EI3JE)
| |
| Russian WW Digi multipler count fixed according to the rules. (TNX R9IR)
| |
| SHIFT+UP/DOWN RIT movement was broken in previous version. Fixed. (TNX K6MR, N6TV)
| |
| UK/EI DX Contest now supported. (TNX EI3JE, M0CKE)
| |
| | |
| Ver 2.2.17
| |
|
| |
| Remote commands can be sent to stations in the network.
| |
| Check multipliers window now shows only mode selected in contest config screen, if not operating mixed. (TNX YT3W)
| |
| WAE some corrections implemented in QTC editing. (TNX E70T)
| |
| Mode change problem for digi modes with CTRL+F1/F2 fixed. (TNX HB9BUN)
| |
| New option available for SO2V mode: Options >Interface specific options >Use SPLIT in SO2V technique.
| |
| When checked, DXLog.net will activate SPLIT mode instead of VFO change when changing entry lines in SO2V technique.
| |
| New radio support added: Flexradio.
| |
| New option available: Options >Interface specific options >Use different bandmap background for active radio.
| |
| When checked, it will use different bandmap background color for active (selected) radio or VFO in SO2R and SO2V mode. (TNX 4O3A)
| |
| COM port switch problem fixed when footswitch was activated quickly couple of times. (TNX R9IR)
| |
| CW speed can be changed with ALT+F9/F10 from QTC received window. (TNX R9IR)
| |
| When QTC receive window is closed by clicking on conrol box, it remembers last state of fields in temporary buffer. (TNX R9IR)
| |
| If window is reopened with same callsign it will restore it state.
| |
| Temporary buffer is cleared when new callsign is used and QTC receive window is opened.
| |
| New buttons available at QTC receive window: F4 sends "DE MYCALL" and F9 sends "QSL Group/Num" (TNX R9IR)
| |
| Spacebar in QTC receive window now cycles in actual line only, not moving to new line anymore. Use enter to skip in next line. (TNX R9IR)
| |
| Escape doesn't close QTC send/receive window anymore, it just stops actual transmission. (TNX R9IR, IZ8JAI)
| |
| Logged operator property wasn't filled correctly when status info message was created. Fixed. (TNX IK2JUB)
| |
| New option in radio port setup: Don't poll during TX and Reinitialize port after switching from TX to RX.
| |
| First option is used to disable radio polling during TX time.
| |
| Second option is used to reinitialize port after you switch from TX to RX. It is useful in case of problems with RF feedback
| |
| during TX time and if your CAT interface has stopped working because of that.
| |
| New radios supported: IC 7850 and IC 7851. (TNX VA3MJR)
| |
| New radio supported: IC 7100.
| |
| QTC receive window msg F4 wasn't sending callsign. Fixed. (TNX R9IR)
| |
| QTC send window ALT+F9/F10 wasn't changing cw speed. Fixed. (TNX R9IR)
| |
| | |
| Ver 2.2.16
| |
| ------------------------
| |
| New option available: in SO2R or SO2V mode, focused entry line can have different color. (TNX CT1ILT)
| |
| Tentec OMNI VII is now supported.
| |
| New contest supported: CQ WW VHF.
| |
| SO2V technique lot of fixes implemented. (TNX CT1ILT, M0CKE, G4IRN)
| |
| New option available: Operating->Shift binds to opposite radio.
| |
| When checked, if operating technique isn't SO1R, when LEFT SHIFT key is pressed focus will be move to opposite
| |
| radio entry line. This allows quickly edit of opposite radio data without moving radio entry line focus with
| |
| up/down arrows or other keys.
| |
| New option available: Tools->Data entry->Cancel serial number reservation only if callsign field is empty.
| |
| When serial number reservation is used and this option is checked, it will cancel serial number reservation
| |
| during wipe qso function only if callsign field is empty. (TNX CT1ILT)
| |
| When single click selection was enabled in bandmap, right mouse click was selecting the spot. Fixed. (TNX CT1ILT)
| |
| ALT+F3 send spot. Added space at the end of default spot message for easier adding of comment. (TNX CT1ILT)
| |
| Bandmap view now can be shown in opposite direction (bandmap context menu Show from higher to lower frequency).
| |
| By default it is shown from lower frequency on top of the screen to higher frequency on bottom of the screen.
| |
| If new option is checked, bandmap view is shown from higher frequency on the top of the screen to lower frequency
| |
| on the bottom. CTRL+UP/DOWN shortcuts are adjusted to works always in same direction in bandmap.
| |
| In bandmap view, when active frequency is close to the band edge, active frequency line is scrolled from middle position
| |
| to the band edge.
| |
| EUHFC prefill database updated. (TNX YT3W)
| |
| NAQP prefill database added. (TNX W9PA)
| |
| Some problems with Update database options should be fixed now. (TNX W9PA)
| |
| Shift and caps lock binding is deactivated when DXLog.net isn't active (focused) application. (TNX CT1ILT)
| |
| In SO2V mode, RX focus was following focus line. Now changed to R1 only. (TNX CT1ILT)
| |
| | |
| Ver 2.2.15
| |
| ------------------------
| |
| Quick fix because of problem with wrong events raised in SSB mode when CAT is connected.
| |
| | |
| Ver 2.2.14
| |
| ------------------------
| |
| If own DXCC wasn't recognized, log file loading was broken. Fixed. (TNX I4UFH)
| |
| $QQSLRESET now resets Intelligent Quick QSL counters. (TNX M0CKE)
| |
| Intelligent Quick QSL now works with separate counters for R1 and R2.
| |
| IARU R1 6M contest is now supported.
| |
| Bandmap delete callsign option was broken when additional data was shown (for example heading). Fixed. (TNX IK2JUB)
| |
| $13 macro doesn't require space char after it anymore. (TNX M0CKE)
| |
| CTRL + UP / DOWN arrows now selects first or last available spot if current frequency is above or bellow first or last
| |
| available spot in bandmap (or bandmap list view). (TNX G4IRN, M0CKE)
| |
| Logged operator list is now built from operator list entered in config screen and log when log is opened.
| |
| Logged operator information is now visible in status window for each station if operator is logged.
| |
| Logged operator information is visible also in Clock window. (TNX G4IRN, M0CKE)
| |
| Double click on station in status window now automatically opens GAB message window with destination set to
| |
| station id which is clicked in status window.
| |
| Work dupes option changed default to yes now.
| |
| Problem with resending CQ while REPEAT mode is on solved. (TNX S51TA)
| |
| RAC contest default message for report outside VE was power instead of serial number. Fixed. (TNX 9A1AA)
| |
| HMKOS 160m band wasn't available in contest config. Fixed. (TNX 9A1AA)
| |
| If tab was used as delimiter in XDT file, searcher didn't found and show correct value. Fixed. (TNX K6MR, N6TV)
| |
| | |
| Ver 2.2.13
| |
| ------------------------
| |
| Bandmap minimum size is now set according to the size of frequency panels. (TNX I4UFH)
| |
| Custom C# script class name can be set to anything needed.
| |
| DXLog.net during initialization of scripts will search for first class in the script which implements ScriptClass interface and will use that class.
| |
| Added enabled/disabled check box in script definition.
| |
| Scripts can be enabled disable from macro with commands:
| |
| "$!ENABLE!script_name" and "$!DISABLE!script_name" where script name is name defined in scripts manager definition.
| |
| When found in the code, enable option calls Initialize method in script and disable option calls Deinitialize method.
| |
| Check partials and N+1 windows now show multiple data from prefill database if they exists.
| |
| Prefill database query for check partials and N+1 windows is now optimized for larger databases.
| |
| Frequency data for PSTRotator is now send to all lines where frequency from radio belongs to band for line from PSTRotator config
| |
| and frequency checkbox is checked. It doesn't depend on currently selected antenna anymore.
| |
| Mode change wasn't sent always when needed to radio. Fixed. (TNX DH6JL)
| |
| Live score band settings wasn't restored from active file when restarted. Fixed. (TNX R9IR)
| |
| Log header visibility status wasn't saved in config file. Fixed. (TNX M0CKE)
| |
| New contest supported: UKSMG 6m contest.
| |
| PSTRotator support is fully finished now. Sending azimuth and/or frequency data. (TNX YO3DMU, M0CKE)
| |
| EA4TX rotator support added. Using UDP messages to ARSVCOM software by EA4TX. (TNX EA4TX)
| |
| .NET DLL's with custom forms can be added now.
| |
| Code is moved to VS 2013.
| |
| WIX Project installer is upgraded to latest version.
| |
| Update database command was broken due optimization for prefill database query. Fixed. (TNX I4UFH)
| |
| VGE Sprint multiplier calculation wasn't correct. Fixed. (TNX EA4TX)
| |
| Auto sending INSERT message after 3 or 4 characters options added. (TNX S51TA)
| |
| Intelligent Quick QSL option added.
| |
| | |
| Ver 2.2.12
| |
| ------------------------
| |
| New networking option: Don't allow qso logging if number isn't reserved.
| |
| When using serial number server, QSO logging will be prevented if serial number isn't reserved from number server.
| |
| Also, when number server is used, when reservation process is started DXLog.net will show active QSO NR as 000 until reserved number is sucessfully
| |
| received or reservation is cancelled.
| |
| GRITTY decoder is now supported for RTTY contest.
| |
| OmniRIG TX/RX status now can be used when CAT TX option is choosen.
| |
| New options added to check partials windows: Show data from prefill database.
| |
| When checked, data from prefill database will be shown in Check partials and/or Check N+1 windows.
| |
| Integration with PSTRotator is now available.
| |
| Florida QSO party Cabrillo file wasn't generated correctly. Fixed. (TNX NF4A)
| |
| Callsign click on callsign in DATA or GRITTY window in ESM mode moved focus to RCVD field, it should stay in callsign field. Fixed. (TNX M0CKE)
| |
| TX/RX switching with OmniRig wasn't implemented correctly. Fixed. (TNX EI2JE)
| |
| Bandmap - data list view - when selected item was gone outside of visible area, list wasn't scrolled at correct position and item wasn't
| |
| visible. Fixed. (TNX M0CKE)
| |
| Tooltip display delay added for Bandmap data list view. (TNX E70T)
| |
| Winkey initialization delay increased to 400ms, according to documentation to allow WK2 to initialize after powep up when COM DTR/RTS pins
| |
| are used for it. (TNX M0CKE)
| |
| MMVARI - audio channel selection was broken. Always set to left. Fixed.
| |
| Number server - serial number reservation now can be used separately for R1 and R2. This allows number server usage also in SO2R mode with
| |
| single PC.
| |
| New macro added: $RESERVENR - sends reservation request for serial number to number server.
| |
| New option available: Spacebar reserver number. When checked, spacebar press in callsign fields sends reservation request for serial number
| |
| to number server. By default, it is checked.
| |
| Reserved number color - now, when serial number is reserved, sent number color will be shown in different color.
| |
| | |
| Ver 2.2.11
| |
| ------------------------
| |
| RDXC rules and database updated. (TNX YT3W)
| |
| | |
| Ver 2.2.10
| |
| ------------------------
| |
| Mouse middle button click wasn't implemented in secondary decoder window. Fixed. (TNX K6MR, W9PA)
| |
| CW/Digi messages are now saved in appdata folder for each contest type.
| |
| Messages are restored from this file when new contest file with same type is created.
| |
| Translation to Italian language is added. (TNX IK2NCJ)
| |
| UBA contest multiplier display corrected by band (not by band/mode). (TNX IK2JUB)
| |
| New contest supported: LA local contest NRRL Winter Contest. (TNX LB3RE)
| |
| | |
| Ver 2.2.9
| |
| ------------------------
| |
| Mouse middle button click in digi mode decoder now also adds call to partner stack. (TNX N6TV)
| |
| New option added: Tools->Scripts manager.
| |
| DXLog.net now supports custom made C# scripts, to enable additional functionalities.
| |
| Custom scripts are written in C# language and they are compiled during runtime.
| |
| Script can be assigned to some shortcut and will be executed when shortcut key is pressed.
| |
| Also, script can be called by name from CW/Digi message as macro command prefixed with "$!".
| |
| For example, if CW/Digi message contains $!SCRIPT1, it will execute script with name SCRIPT1.
| |
| New contest supported: XE RTTY International Contest.
| |
| Added band changes count for Multi/Single category in CQ WPX RTTY Contest.
| |
| CTRL+SHIFT+F4 on the fly scenario/message editor wasn't working properly. Fixed. (TNX IK2NCJ)
| |
| | |
| Ver 2.2.8
| |
| ------------------------
| |
| Band maximum time and minimum pause time implemented for some Italian contests. Config key = BAND_MIN_LIMITS (TNX IU3AZC)
| |
| New contest supported: Old New Year Contest. (TNX YT3W)
| |
| New contest supported: Popov Memorial Contest. (TNX YT3W)
| |
| SARTG HNY RTTY Contest scoring fixed. DXCC multipliers wasn't counted. (TNX IU3AZC)
| |
| WW PMC Contest. Changed list of multipliers according to new rules. (TNX S54X)
| |
| New option added: Tools->Data entry->Enable grab call from decoder window.
| |
| When checked, it will automatically grab last known (highlighted) call from digi mode decoder window.
| |
| User can disable this functionality by unchecking it.
| |
| In previous version it was always on.
| |
| ALT+CLICK in digi decoder windows now adds call to partner stack.
| |
| New contest supported: UBA PSK63 Prefix Contest.
| |
| $TR macros wasn't implemented correctly when using digi modes. Fixed. (TNX IK2NCJ)
| |
| CONTEST_FIRST_HOUR parameter in contest config file now accepts also minutes value, if specified. (TNX OK5MM)
| |
| PTT sequence implemented. Choose PTT1, PTT2, PTT3 in port configuration to enable this functionality.
| |
| PTT pins are executed in following sequence:
| |
| 1. PTT + delay for PTT delay ms
| |
| 2. PTT1 + delay for PTT seq delay ms
| |
| 3. PTT2 + delay for PTT seq delay ms
| |
| 4. PTT3 + delay for PTT seq delay ms
| |
| Contest recorder buttons wasn't working properly in floating mode. Fixed. (TNX K6MR, IU3AZC)
| |
| Footswitch (DSR) pin can be used to switch between Radio1/Radio2 input lines now. (TNX SJ2W)
| |
| New contest supported: Cup of Russia CW. (TNX RU3DNN, RK3BX)
| |
| HA DX Contest: contest rules was changed. Fixed. (TNX 9A1AA, 9A7R)
| |
| NA Sprint SSB contest rule changes applied to new config. KH6 mult is added in it. (TNX K6MR)
| |
| | |
| Ver 2.2.7
| |
| ------------------------
| |
| Code for opening windows in application is optimized. Now it should work much faster.
| |
| CW/Digi keyboard alternate messages shortcuts wasn't available. Fixed. (TNX HB9BUN)
| |
| Worked DXCC window in floating mode layout, it wasn't possible to change the continent. Fixed. (TNX IK2NCJ)
| |
| World map window title bar color selection option was missing in pop-up menu. Fixed. (TNX E77DX)
| |
| Statistics window controls wasn't resized properly when floating mode was used. Fixed. (TNX IK2NCJ)
| |
| Bandmap list is now scrollable with mouse wheel. (TNX YU7RL)
| |
| Toolbar functionality is finished now.
| |
| Beam heading calculation bugfix. When worked qso with own country, own lat/long was reset to lat/long from qso. Fixed. (TNX W9PA)
| |
| Partner window option "No band/mode filtering" wasn't restored correctly on opening. Fixed. (TNX IK2JUB)
| |
| When using contest with separate periods and SO2R mode, if period was changed from R2 qso line, R1 qso line period wasn't changed. Fixed. (TNX ES7GM)
| |
| DXCC exception database created to add some exceptions for DXCC determination when they aren't covered in CTY file.
| |
| For example, it is used to distinguish between KG4 and K for KG4x, KG4xx and KG4xxx callsigns. (TNX IK2JUB)
| |
| New log option available: Always show mode in QSO lines. If checked, it will make column with mode always visible, regardless of FIELD_MODE_VISIBLE
| |
| parameter in contest config file. (TNX XE2K)
| |
| 9A CW Contest wasn't scored correctly for outside 9A stations. Fixed. (TNX HB9BUN)
| |
| OK DX RTTY Cabrillo QSO line wasn't align correctly. Fixed. (TNX 9A6SJZ, 9A7R)
| |
| New contest supported: World Wide Iron HAM Contest. (TNX 9A7R)
| |
| DARC XMAS contest DOK multiplier wasn't calculated correctly. Fixed. (TNX DL2MDU)
| |
| New radio supported: Yaesu FT-3000.
| |
| | |
| Ver 2.2.6
| |
| ------------------------
| |
| When previous QSO was edited and saved, 10 min rule checking method was called.
| |
| In this method, part of code to check if 10 min rule is needed for category was missing. Fixed. (TNX IU3AZC, IK2NCJ)
| |
| If different CW speed for Radio1 and Radio2 was used, only last changed speed was saved and restored to both radios.
| |
| Now changed to save each cw speed separately and restoring it correctly. (TNX IK2NCJ)
| |
| Bandmap options "Enable single click selection" and "Display multipliers only" wasn't saved and restored properly. Fixed. (TNX IK2JUB)
| |
| Commands->DX Cluster->Default comment option added. If set, this comment text will be added to each spot sent to DXC. (TNX 9A1AA)
| |
| DXN files are now associated to DXLog.net.exe during installation. You can open log file directly with clicking on it. (TNX IK2NCJ)
| |
| Migrated SQLite dll to version 1.0.94.
| |
| ARRL 10m contest database added. (TNX W9PA)
| |
| Configuration file caching added. Loading/closing application is now much faster.
| |
| New contest supported: HB XMAS Contest. (TNX HB9BUN)
| |
| | |
| Ver 2.2.5
| |
| ------------------------
| |
| $FREQID macro added. It will send frequency of Radio1 take from defined station in the network
| |
| For example: $FREQIDRUN1 will take frequency from station with ID RUN1.
| |
| $FREQIDMULT will take frequency from station with ID MULT. (TNX R9IR)
| |
| Target file is now loaded automatically when log is opened if it was previously loaded. (TNX IK2NCJ)
| |
| Radio RUN/S&P mode is now saved to and restored from current log. (TNX IK2NCJ)
| |
| New bandmap option available: enable single click selection. When checked, single click at bandmap will
| |
| make spot selection and frequency change.
| |
| New window available: Extra information. Shows extra information from XDT files.
| |
| Check multiplier window color wasn't set properly when changed from default value. Fixed. (TNX K6MR)
| |
| Popup menu in floating windows mode wasn't shown on all windows correctly because focus was changed to main window automatically. (TNX K6MR)
| |
| New bandmap display options available: Sun, Heading, Long path and Exchange. (TNX IU3AZC, K6ND, N1RR)
| |
| Bandmap windows now shows also number of available spots, new spots, multipliers and points per band.
| |
| Title bar color for each window can be changed now according to user preference.
| |
| Extra information new plugin is available: www.hamqth.com online lookup.
| |
| New contest supported: RCWC Mini-test.
| |
| TARA RTTY and 10M RTTY contest. RCVD field was set to numeric only. Fixed to accept alpha characters too. (TNX K6MR)
| |
| New contest supported: ARRL 160m contest.
| |
| New contest supported: INORC Contest. (TNX IK2JUB)
| |
| DXC Announcements window: Multipliers only selection wasn't saved to and restored from config file. Fixed. (TNX IK2JUB)
| |
| | |
| Ver 2.2.4
| |
| ------------------------
| |
| Status window now shows 10 minutes rule timers in different colors.
| |
| Rearrange code to display 10 minute rule errors for multi/single stations.
| |
| New option available: Options->Networking->Don't allow QSO logging if band change rule is broken.
| |
| Checked by default. If 10 minute rule is broken, DXLog wouldn't allow to log such QSO.
| |
| Error message will be displayed bellow QSO line. (TNX I4UFH)
| |
| Added $NEXTSERIAL / $PREVSERIAL macro commands.
| |
| New contest supported: Estonian local contest called ES-LL-KV. (TNX ES7GM)
| |
| Radio/Ant status window is now resized correctly when using larger fonts and have over 4 antennas on one band. (TNX K6MR)
| |
| Radio/Ant status window antenna selection can be done directly by mouse click on desired selection.
| |
| New option available: Options->Networking->Show different active QSO line color during wait status.
| |
| If checked, DXLog.net will change the color of new QSO line during wait period in status window.
| |
| There are two different color, one for wait period until last minute, and another one for last minute.
| |
| When wait status isn't active, qso line will have normal background color.
| |
| Sked/Pass station. Numeric pad usage was disabled. Fixed. (TNX IK2NCJ)
| |
| $FREQP, $FREQS, $FREQxx macros implemented. "xx" is band for search in the network.
| |
| QTC data for sent QTC's wasn't correctly formatted in Cabrillo export (sent by/rcvd by callsigns where changed). Fixed. (TNX DF1QR)
| |
| QTC frequency was reset to default if QTC was sent/received before QSO is logged. Fixed.
| |
| Cabrillo export is now resorted to include QTC lines between QSO lines according to the time.
| |
| $MK2R=x macro implemented. Send custom commands to microHAM device.
| |
| New contest supported: Russian WW multi mode contest. (TNX YT3W)
| |
| New contest supported: S5 local contest KV PRVENSTVO ZRS. (TNX 9A4ZM)
| |
| If DXLog.net can't find any device for Playing and/or Recording, MP3 configuration window was broken. Fixed. (TNX IK2NCJ)
| |
| Rate window new options available.
| |
| Set global target qso rate. It will take this number as average qso rate for each hour of the contest and will
| |
| compare current qso number with number calculated based on this number. And difference will be shown in rate window.
| |
| Show projected score. This will calculate projected score at the end of the contest based on currently loaded target file
| |
| and current score. Calculation is done at minute level.
| |
| QSY Wizard window added. When using HamCAP to check propagation data, if chart tab is used, QSY Wizard window will
| |
| show possible QSY bands at current time, if HamCAP prediction for qso in that hour is greater of 5 percent.
| |
| If not, it will show band labeled as SKED with UTC hour when maximum prediction is found.
| |
| LZ DX Contest added database for LZ stations exchange. (TNX R9IR)
| |
| DXC Announcements window optimized code for faster display refresh when lot of data is received from DXC.
| |
| When floating windows mode was used, focus wasn't returned to main window if some of child windows was clicked. Fixed. (TNX K6MR, IK2NCJ)
| |
| | |
| Ver 2.2.3
| |
| ------------------------
| |
| Some listview objects (status window, bandmap list window) flickered during refresh on WinXP. Fixed.
| |
| Multi/Single QSY counter calculation code optimized.
| |
| Added code to check if location of main screen is visible on some of screens/monitors attached to the system
| |
| when restoring location from config file during startup. If it isn't visible, main screen will be shown on
| |
| it's default position assigned by OS.
| |
| EU VHF/UHF/SHF contest. During QSO edit, band points was multiplied because one of the object properties wasn't
| |
| copied correctly during qso edit. Fixed. (TNX 9A6C)
| |
| FT-990 is now supported.
| |
| When using AlternateCQ macro commands, sometimes first CW character was sent twice. Fixed.
| |
| Added 200ms delay When using $TR1 / $TR2 commands to switch TX radio to wait for interface to switch active radio.
| |
| Macro processing in SSB mode using two radios wasn't implemented correctly. This was creating some blank line logging
| |
| errors. Fixed now. (TNX K6MR, N6TV)
| |
| WAE RTTY. QTC receive window isn't modal anymore, so received data can be clicked and transfered to QTC receive window.
| |
| This also enable sending standard and additional messages by clicking buttons in decoder window.
| |
| Please note that if you want to use shortcuts defined in QTC receive window, it must be focused.
| |
| Also, QTC group and number of qsos in QTC should be entered manually to activate fields in QTC receive window.
| |
| ALT+K (Keyboard) RTTY sending was stucked when using 2Tone and buffer was empty. Fixed. (TNX K6MR)
| |
| | |
| Ver 2.2.2
| |
| ------------------------
| |
| RAEM contest Lat/Lon field max length had default value of 6 chars. Changed to 7. (TNX R9IR)
| |
| New option available: Commands/Pass frequency. Set passing frequency for station passing.
| |
| New option available: Windows/Skeds (ALT+B). Shows scheduled qso skeds.
| |
| New option available: Commands/Take a sked (ALT+E). Adding qso sked in sked table.
| |
| New option available: Commands/Pass a station (ALT+D). Passing qso to another frequency / station. QSO is added to sked table too.
| |
| Status window now shows QSY frequencies for each station in network.
| |
| All sked changes (add new, modify, delete) are propagated through the network.
| |
| Sked window is displayed automatically if it's not already opened when there are "near time" skeds in the table.
| |
| Passing a station command will automatically popup sked window on all network stations if sked time is within 10 minutes boundaries from actual time.
| |
| World map window when double clicked at task bar it was maximized. Fixed. (TNX DL8OBQ)
| |
| Networking code optimized, especially when UDP network type is used.
| |
| Networking propagating dx spots with QSX comment through network was causing adding additional "*" at the begging of callsign. Fixed. (TNX DL8OBQ)
| |
| Worldmap day/night shadow problem fixed.
| |
| | |
| Ver 2.2.1
| |
| ------------------------
| |
| New option available: Options->Data files->Update database. This will update your local prefill database from currently opened log. (TNX W9PA)
| |
| DARC 10m contest adjusted Cabrillo QSO line output according to the rules. (TNX DK9TN)
| |
| Rates window new options available: Rates Units. (TNX I4UFH)
| |
| INQP stations working at/from county borders now can be logged in single QSO lines. Up to four county borders on both sides are supported now. (TNX W9PA)
| |
| New contest supported: RAEM International HF Contest.
| |
| Bugfix: click in radio 2 decoder windows on received data was sending data to first radio qso line. Fixed. (TNX K6MR)
| |
| Bugfix: additional CW message shortcuts in CW mode were available only if technique was Advanced SO2R. Fixed. (TNX K6MR, N6TV)
| |
| DOK database refreshed, for usage in WAG contest. (TNX DK9TN, DK8ZZ)
| |
| Winkey use of speed pot on device is now enabled.
| |
| Callsign background in bandmap view is now changed when radio is at same frequency (+/ bw defined in bandmap properties). (TNX K6ND)
| |
| Time ON/OFF calculation wasn't quite correct because of milliseconds rounding. Fixed. (TNX N6TV)
| |
| Sprint insert key logic wasn't implemented for digi modes. Fixed. (TNX K6MR)
| |
| | |
| Ver 2.2.0
| |
| ------------------------
| |
| Key remapping when CTRL/ALT/SHIFT was used in key combination to remap to some other key, status of key was resetted to non pressed. Fixed. (TNX N6TV)
| |
| Key remapping when two keys function was switched between them, loop was created. Fixed. (TNX N6TV)
| |
| Using additional CW/Digi messages in digi modes was setting tx in manual TX mode (as it is in Keyboard ALT+K mode). Fixed. (TNX R9IR)
| |
| Yaesu FT-857 CAT protocol should be fixed now to work on same way as FT-897.
| |
| | |
| Ver 2.1.8
| |
| ------------------------
| |
| New shortcuts/menu options available:
| |
| CTRL+ALT+UP grabs first valid upper spot and sends a frequency to inactive VFO.
| |
| CTRL+ALT+DOWN grabs first valid lower spot and sends a frequency to inactive VFO.
| |
| Menu options are:
| |
| Operating->Bandmap->Grab first valid upper spot to 2nd VFO
| |
| Operating->Bandmap->Grab first valid lower spot to 2nd VFO
| |
| Starting point for frequency is inactive VFO frequency. In case that inactive VFO is on different band then active one,
| |
| start point will be the frequency from active VFO, so band of inactive VFO will be changed to same as active one. (TNX I4UFH)
| |
| RDA Contest ADIF export changed to CNTY/STATE. (TNX E73Y)
| |
| RDA Contest added calculation for Russian "/P" stations. (TNX UA6AA)
| |
| LZ HF Field new window available worked callsigns. Shows which callsigns are worked during the contest with information
| |
| about when new qso with same station will be available. (TNX 4O3A)
| |
| Band changes counters added for multi/single and multi/two categories in CQ WW RTTY. (TNX EI3JE)
| |
| New option added: Tools->Data entry->Prefill values
| |
| Callsign value when new qso row is initialized, it is automatically prefilled with desired value. (TNX 4O3A)
| |
| OTRSP device AUX pins wasn't switched correctly. Fixed. (TNX K6ND, N1RR)
| |
| NA Sprint own multiplier wasn't counted. Fixed. (TNX W9PA)
| |
| All Asian multiplier window was broken when some special prefix was worked (for example HS50). Fixed. (TNX 9A2NO)
| |
| WAE DX Contest added some optimization in QTC receive window. QTC's also can be edited after save.
| |
| Azimuth info shown in Check multiplier window was wrong when gridsquare was filled at config screen.
| |
| Bugfix: cat command for SSB mode change was based on current band, not new one, when band was changing with frequency typing in callsign field.
| |
| Because of this, when band was changed for example from 40 to 20m mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
| |
| Bugfix: worked DXCC window font size wasn't correctly restored when log is opened. Fixed. (TNX W9PA)
| |
| New option available in Radio config screen: Use CI-V (don't poll).
| |
| This option will enable usage of CI-V transceive mode for ICOM radios, instead of standard radio cat polling.
| |
| In previous versions enabled CI-V transceive mode on some radios caused CAT communication error which disconnects the radio until port is opened again.
| |
| New multipliers added for contest KT KUP Srbije. (TNX YT3W)
| |
| Bugfix: config file for KT KUP Srbije missed Cabrillo operator category for NON-YU category. Fixed.
| |
| SAC Contest: added serial number definition for all categories.
| |
| Single OP 2 VFO mode (SO2V) is now enabled.
| |
| Rate window qso and multiplier worth informations added.
| |
| DXCluster data manipulation code is completely rewritten to optimize performance.
| |
| Bandmap list sorting options added.
| |
| New option available: Options->Interface specific options->Prevent TX if another radio on same band.
| |
| If checked, it will prevent TX if we found another radio (Radio1 vs Radio2 in SO2R mode, or any networked radio if network is enabled) is on same band.
| |
| Currently, in network mode, we are comparing our TX radio band with BAND field in network list.
| |
| Please note that in case of network failure, we can't determine another radio band, so this should be just temporary solution and some hardware solution
| |
| will be much safer for such scenarios. (TNX K6ND, N1RR)
| |
| New shortcut added: comma (',') brings popup window which allows to enter a list of callsigns which should be added to call stack (partner window).
| |
| If callsign field is empty, first call from call stack will be automatically added to callsign field. (TNX DF1QR)
| |
| New shortcuts available: CTRL+ALT+F1..F12 (or AltGr + F1..F12). This will send additional CW/Digi messages (1..12 check additional message window ALT+C). (TNX DF1QR)
| |
| Added buttons to access additional messages also at Digi mode decoder windows.
| |
| Starting repeat loop by pressing F1 key is now disabled when station is in S&P mode.
| |
| In digi mode contest when audio frequency correction was used, ALT+F4 QSY'ed to wrong frequency. Fixed.
| |
| ALT+K button in digi mode decoder windows didn't start keyboard mode. Fixed.
| |
| Keyboard (ALT+K) message sending in digi mode was delayed between characters. Fixed.
| |
| Own callsign isn't highlighted anymore in decoder windows. This will prevent to grab it as last known callsign.
| |
| Clock window added new background color type (S&P background). Each time when focused radio will change mode to S&P,
| |
| background color of clock window will be changed to this color.
| |
| Worldmap color had wrong colors for day/night under some circumstances. Fixed. (TNX IZ4AFW)
| |
| Added 100 ms initialization delay, to allow Winkey device to initialize when powered from COM port. (TNX OK4BX)
| |
| Redefine keys wasn't working properly when multiple key combination was remapped. Fixed. (TNX OK4BX)
| |
| New contest supported: Russian WW Digital Contest.
| |
| | |
| Ver 2.1.7
| |
| ------------------------
| |
| Bandmap data display was broken when callsign with unrecognized DXCC was received from cluster.
| |
| New contest supported: SCC RTTY Contest.
| |
| Fixed some problems with bandmap scrolling for WAE contest. Available QTC number was copied to callsign field. (TNX DK8ZZ, 9A1AA)
| |
| ADIF export it's possible to add QSO comment for all qsos during ADIF export procedure for example contest name. (TNX DK8ZZ)
| |
| ADIF export ADIF_KEYS config key 3rd parameter available now. If specified, it contains Regex expression to evaluate if field
| |
| will be exported for particular QSO.
| |
| See RDAC contest definition for first usage example (RDA field is exported only for UA, UA2, UA9, R1FJ and R1MV stations).
| |
| RDAC contest received RDA value is exported in ADIF now. (TNX 9A2NO)
| |
| New contest supported: SCC RTTY Contest.
| |
| Added prefill database for US/VE stations in CQ WW RTTY contest config. (TNX EI3JE)
| |
| Fixed some issues when bad data was received from CAT interface, mostly due RF problems.
| |
| Network status info window is cleared immediately when network is disabled. (TNX I4UFH)
| |
| Bug fix: dx cluster traffic from clusters connected in network wasn't visible in DXCluster window. Fixed. (TNX I4UFH)
| |
| Show network stream option is added in drop-down of DXCluster window.
| |
| If checked, it will show traffic from network connected clusters. By default it is checked. (TNX I4UFH)
| |
| DXCluster window now shows traffic from network in different color.
| |
| | |
| Ver 2.1.6
| |
| ------------------------
| |
| New contest supported: NRAU NAC Open V/U/SHF Contest.
| |
| New contest supported: NRAU NAC 10M Contest.
| |
| New contest supported: IARU Region 1 Fieldday (RUS). (TNX UA6AA)
| |
| Fixed perfomance issues when huge amount of spots are received from DXCluster (or Skimmer).
| |
| New option available: Tools->Data entry->Use INSERT mode in RCVD fields.
| |
| Switch to INSERT mode instead of OVERWRITE mode in all RCVD fields. Default is not checked.
| |
| DXCluster reconnect functions are implemented now.
| |
| If DXCluster can't be connected, DXLog.net will try to establish connection again each 30 seconds.
| |
| In case of inactivity, if there isn't any data received from DXCluster in period of 120 seconds, DXCluster
| |
| is disconnected and reconnection procedure is started.
| |
| EDI export is expanded to include bonus for WWL's worked (CWWLB tag). (TNX RO2F)
| |
| EDI info tags are now prefilled with info from Contest config screen. (TNX RO2F)
| |
| Bandmap is now automatically expanded to enable visibility of higher frequencies. (TNX RO2F)
| |
| Final score calculation custom formula regional setting wasn't set to "en-US". Fixed. (TNX KB9S)
| |
| Goto QSO window (CTRL+G) was accidentaly replaced by Target QSO per hour window. Fixed. (TNX IK2JUB)
| |
| IARU R1 DARC contest config file. Cabrillo line definition fixed according to the rules. (TNX IK2JUB)
| |
| HQ database lookup added for IARU HF Championship and WRTC 2014 Contest. (TNX SA6AQP)
| |
| VHF/UHF/SHF contest definition can used bonus points per band. Added in EU V/U/SHF definition.
| |
| New networking options available. UDP type broadcasting can be used now for local network. Also this
| |
| can be used in combination with client/server infrastracture which enable usage of multiple subnets, routing etc.
| |
| OTRSP compatible devices are supported now. Currently tested with YCCC SO2R+ box. (TNX OE1EMS/E77DX, S58A).
| |
| Available QTC number is now visible in Bandmaps. (TNX IZ3EYZ).
| |
| Hide dupes and invalids are now separated as two choices in bandmap popup menu. (TNX IZ3EYZ)
| |
| Morse Runner integration implemented. You can now simulate contest if Morse Runner is active.
| |
| Simulation is started with menu choice: Tools->Data entry->Enable Morse Runner simulation.
| |
| PageUp/PageDown can be used as rit control (Up/Down arrows in Morse Runner).
| |
| COM object called DXLog.net.COM.COMInfo is now available. It provide some information need for integration with
| |
| external applications. First implementation will be used for adding new plugin for ACOM Tools application, to send
| |
| frequency data to ACOM 2000A amplifier. COM object can easily be accesed from simple vb or java script, or another
| |
| application.
| |
| New contest config key available: ADIF_KEYS.
| |
| It can be specified multiple times. It's used to specify ADIF export definition. Contains key+value pair, separated by ";".
| |
| Key = ADIF key. Value = C# expression for evaluation. $VALUE in expression contains reference to DXQSO object.
| |
| Export to ADIF for IOTA contest now exports IOTA reference too. (TNX 9A2NO, DK8ZZ)
| |
| | |
| Ver 2.1.5
| |
| ------------------------
| |
| Load contest at startup was broken because country file is loaded too late in previous version. Fixed.
| |
| Problem with WPX determination for calls such as 7QNL fixed. (TNX UA6AA)
| |
| | |
| Ver 2.1.4
| |
| ------------------------
| |
| CH canton removed in Helvetia contest. (TNX HB9ELV)
| |
| Volga contest config file serial number alignment was left, instead of right. Fixed. (TNX RW4NW)
| |
| SCP database lookup from external database is now disabled for WRTC contest type. Only "In log search" is allowed.
| |
| New contest config parameter DXCC_DB_USE_ARRL_LIST. Allows to use ARRL country list instead of CQ country list.
| |
| This means that all countries from CTY.dat file with main prefix starting with '*' sign will be ignored.
| |
| UA2 QSO party 40m band filter was wrong in points calculation in config file. Fixed. (TNX 9A1AA)
| |
| VC 2010 RTM check removed from setup because of problems with Win8.1. (TNX UA6AA, E73Y)
| |
| Information on targets tab in statistics window wasn't refreshed properly when new qso was logged. Fixed. (TNX 9A1AA)
| |
| Target file export fixed to include hours with zero qsos. This is needed to properly display hourly comparisions.
| |
| | |
| Ver 2.1.3
| |
| ------------------------
| |
| Gray line map now shows grayline twilight zone (civil or nautical). Also, it can show graylight zone based on D and F layer calculations. (TNX N6TV)
| |
| New contest supported: New England QSO party (NEQP).
| |
| New contest supported: 7th Call Area QSO party (7QP).
| |
| INQP config adjusted to accept entries from 7QP and NEQP. (TNX W9PA)
| |
| New contest supported: Russian Championship. (TNX YT3W)
| |
| | |
| Ver 2.1.2
| |
| ------------------------
| |
| During QSO saving in ESM mode, CW keyer was sending first letter of previously logged callsign before "TU" message. Fixed. (TNX YU7RL)
| |
| Option "Tools->Data entry->ESM mode change focus on $LOGGEDCALL macro" state wasn't properly restored after restart. Fixed.
| |
| DXCluster window opening (ALT+O) was broken if stream history logging was active under some circumstances. (TNX YU7RL)
| |
| New contest supported: Indiana QSO party INQP.
| |
| Grayline world map is now available.
| |
| Sunset/Sunrise time calculation algorithm changed.
| |
| Added sunset/sunrise colors to clock window.
| |
| New contest supported: UA1DZ Memorial Cup.
| |
| When Shift+Fx key was pressed while recording was already in progress, error exception was shown. Fixed. (TNX DF1QR)
| |
| Due to moving log to SQLite format, QSO times were converted to local time zone when log was loaded, instead of UTC. Fixed.
| |
| | |
| Ver 2.1.1
| |
| ------------------------
| |
| DXN file format is now changed to SQLite database format.
| |
| QTC file is now included in DXN file, separate file isn't needed anymore.
| |
| ADIF export: OPERATOR field is visible in operator logged during qso logging. (TNX DF1QR)
| |
| Repeat timer wasn't refreshed when changed with RPT text command. (TNX JG1VGX)
| |
| Fixed some problems with dx cluster stream / spot logging. Code works much faster now.
| |
| ALT+Y and CTRL+F3 shortcuts now changing station type for active qso line.
| |
| If active line is new qso line, station type is changed for all new qsos. (TNX OK1RI)
| |
| New text commands added: RUN, MULT, RUN1, RUN2 change station type according to text command.
| |
| Cabrillo file is now sorted during export according by time of qso, sent serial number (if contest uses one) and qso id.
| |
| Band changes are now calculated together with rates when scrolling through the log. (TNX OK1RI)
| |
| URAL Cup contest sent nr field was hidden. Fixed. (TNX R9IR)
| |
| New contest supported: DIG QSO Party.
| |
| Load/Export target files options added.
| |
| New statistics options available. Targets are now visible in Statistics window and can be compared with actual log.
| |
| Statistics by continent available.
| |
| Copy as image option added to statistics and summary windows.
| |
| Copy as text option added to statistics window.
| |
| CQ MM DX contest config live score contest name parameter added to allow posting of score to cqcontest.net. (TNX PY3KN)
| |
| Helvetia contest config line to calculcate HB->DX qso correctly. (TNX HB9DUR)
| |
| Frequency warning file added for Helvetia contest. (TNX HB9DUR)
| |
| File->Export->Summary file option added.
| |
| During Cabrillo export, user is prompted for Summary file creation.
| |
| When ALT-F4 (return to CQ freq) command was issued in case of Yaesu FT2000/5000 radio, sub vfo (VFO-B) tx was always activated. Fixed. (TNX RZ3AZ)
| |
| | |
| Ver 2.1.0
| |
| ------------------------
| |
| Number server was broken because of changes regarding number reservation per station type. Fixed during WPX SSB.
| |
| If number server is used, when callsign is double clicked in bandmap or dxcann window, number isn't reserved automatically anymore until spacebar isn't pressed.
| |
| It doesn't depend on station type anymore.
| |
| Bugfix: QSO editor. When some space characters after received report were deleted, exception was raised after moving focus back to Rcvd field.
| |
| LOCATION tag in Cabrillo added for CQ WPX Contest.
| |
| CATEGORY-OVERLAY is removed if overlay value is empty.
| |
| Gab window is now hidden automatically after 15 sec delay, if it was opened automatically when GAB message was sent/received. (TNX NQ4I)
| |
| EA PKS63 and EA RTTY contest. Received exchange was copied from previous qso always. Config changed so copy works only for qsos with EA/EA6/EA8/EA9 stations. (TNX 9A6SJZ)
| |
| Yuri Gagarin cup config changed according to the rules for 2014 KEDR stations. (TNX IK2JUB)
| |
| | |
| Ver 2.0.25
| |
| ------------------------
| |
| Contest recorder drop down menu option MP3 Configuration wasn't implemented. Fixed. (TNX DK8ZZ)
| |
| New interlock options added. Interlocking is now possible between multiple stations.
| |
| It can be defined fixed (with multiple station IDs) or dynamically, based on status info received in network.
| |
| Possible options are:
| |
| 1. Interlock with station(s) on same band
| |
| 2. Interlock with station(s) on same band+mode
| |
| 3. Interlock with all stations visible in status list
| |
| Dynamic station list is built when TX is requested from info available in status list in that point of time.
| |
| In multi op environment, when number server is used, number is automatically reserved when callsign bandmap or dx announcements window is
| |
| double clicked only if station type isn't Mult or Support.
| |
| New contest supported: OK/OM DX SSB contest. (TNX OK1RI)
| |
| Bugfix: when voice message was recording and play message was started before recording is stopped, DXLog.net was crashed. Fixed. (TNX W9PA)
| |
| Bugfix: K3 SPLIT CAT command wasn't implemented properly. Fixed. (TNX W9PA)
| |
| Bugfix: Radio internal DVK usage was broken. (TNX IK2NCJ, IK1HJS)
| |
| Parsing DX spot comments for QSX frequency added. DXLog.net now looks for "QSX" text in comment and trying to parse valid frequency.
| |
| If frequency is found, spot callsign will be marked with "*" before callsign and double click on such spot will change radio to split mode
| |
| immediately. Valid QSX in comment can be full frequency or just KHz part. For example: QSX 3662 or QSX 662 will set split frequency
| |
| to 3.662 in both cases. (TNX W9PA)
| |
| Bandmap callsign color for multipliers was wrong for some contests when contest period was changed and received data wasn't copied
| |
| by default from previous qsos. In that cases, DXLog.net needs to find data from guess database. Fixed. (TNX YT3W, 9A1AA, YU7RL).
| |
| Warning message added when duplicate contest definition is found in AppData folder. Only first file with definition is loaded,
| |
| any other file with definition for same contest name will be discarded and user will be notified about these files.
| |
| New option available: Edit->Edit serial number. This allows to edit serial number for previous or current QSO entries. (TNX YU7RL).
| |
| Sent serial number field for previous qso is now accessible by pressing TAB key, so user can easily edit sent serial number for previous qso. (TNX N6TV)
| |
| Bugfix: cat command for SSB mode change was based on current band, not new one. Because of this, when band was changed from 40 to 20m
| |
| mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
| |
| CQ WPX band changes rule for multi op stations (M/S & M/2) fixed according to the rules.
| |
| JT65 mode added to DXpedition contest definition. (TNX E70T)
| |
| Bugfix: DXCluster list editor exception happens when duplicate entries exists in cluster names. (TNX K3UK, N6TV)
| |
| $ALTERNATECQ / $ACQ macro fixed, together with new definition for AlternateCQ scenario. (TNX IK2NCJ)
| |
| CQ-MM contest definition fixed according to the rules. (TNX VE2EBL)
| |
| SMR multiplier added to His Majesty The King of Spain contest. (TNX YT3W)
| |
| New contest supported: BDM RTTY WW Contest. (TNX YT3W)
| |
| New contest supported: QRP HF RTTY Contest. (TNX YT3W)
| |
| New contest supported: FOC BW QSO PARTY. Added FOC members database. (TNX F5IN)
| |
| Ctrl+Shift+Fx key now opens message editor (or on the fly scenario editor), beacuse Shift+Fx in SSB mode starts message recording. (TNX IK2NCJ)
| |
| | |
| Ver 2.0.24
| |
| ------------------------
| |
| ADIF import was broken when dxcc of callsign wasn't recognized correctly or callsign contains "EOR" text. (TNX E73Y)
| |
| NAQP RTTY RCVD field length expanded to same length as NAQP. (TNX KB9S)
| |
| Cabrillo export definition checking added to prevent exceptions from export routine if Cabrillo line definition is missing in config file. (TNX DL1MAJ)
| |
| VHF guess database lookup was broken after SCP & database optimization. Fixed. (TNX DL1MAJ)
| |
| Contest recording is added.
| |
| MMVARI form closing was causing runtime error. Fixed.
| |
| Upgraded ObjectListView objects to v2.7.0.
| |
| Different color for double multiplier is now available in Bandmap and DXC Announcements windows. (TNX IK2JUB)
| |
| Hide dupe / invalid qsos and Display multipliers only settings are now saved in config and restored when log is opened / created.
| |
| CWT config changed (new bands added). (TNX SA6AQP)
| |
| CWOps database updated. (TNX SA6AQP)
| |
| | |
| Ver 2.0.23
| |
| ------------------------
| |
| Digital modes recognition from bandplan when spot is received from DXC fixed. (TNX W9PA)
| |
| Worked prefixes window was broken under some circumstances. Fixed. (TNX W8AKS)
| |
| New rules for EA RTTY and EA PSK63 contest implemented. (TNX EA4ZK)
| |
| Bandmap editor implemented. Check Bandmap properties in radio 1 or radio 2.
| |
| There are 10 different bandmaps available, default one which comes with installation and 9 which can be
| |
| saved by user.
| |
| Check partials and Check N+1 display order is changed now. N+1 algorithm is fixed.
| |
| This windows now shows data first in following order:
| |
| 1. already worked calls, but not dupe
| |
| 2. dupe calls
| |
| 3. all other calls
| |
| In each of these three groups, callsigns are sorted alphabetically.
| |
| SCP is now rewritten to optimize performance. Regex queries removed.
| |
| Cabrillo "LOCATION" tag added for ARRL contests.
| |
| Databases for YU and E7 local contests are refreshed now. (TNX YU7RL)
| |
| Live score auto posting setting is now remembered in dxn file and restored when file is opened.
| |
| | |
| Ver 2.0.22
| |
| ------------------------
| |
| Wednesday MinTest Cabrillo output fixed according to the rules. (TNX RZ3AZ/UA5C)
| |
| QTC network synhronization didn't worked properly for WAE RTTY contest.
| |
| New contest supported: WRTC 2014.
| |
| New option available: Commands->Live score->Use UDP broadcast. If checked, score will be broadcasted to selected
| |
| IP address/port instead of making post via http, as requested by WRTC 2014 committee.
| |
| OK/OM DX Cabrillo fixed according to format requested by contest robot.
| |
| WWPMC contest config check was broken. Fixed. (TNX 9A4CD)
| |
| Multiplier check routine from recinfo field was broken and call wasn't added to bandmap when received
| |
| from dxcluster. Fixed.
| |
| NAQP rcvd field expanded to support longer names. (TNX W9PA)
| |
| NAQP config fixed by the rules. (TNX W9PA)
| |
| Network time server was creating time info packets with local time info, instead of UTC. Fixed now.
| |
| Regex processing routing had bug when processing RCVD field under some conditions. Fixed now. (TNX IK2NCJ)
| |
| New contest supported: BALKAN HF CONTEST.
| |
| New contest supported: Tesla Memorial HF CW Contest.
| |
| Marconi Memorial HF CW Contest config file changed according to the new contest rules. (TNX IK6BAK)
| |
| Multiplier count for NA Sprint contest fixed according to the rules. (TNX W9PA)
| |
| Added prefill database for NA Sprint. (TNX W9PA)
| |
| | |
| Ver 2.0.21
| |
| ------------------------
| |
| FileStream buffer wasn't correctly flushed to disk, which caused corruption of DXN file. Fixed now.
| |
| OK/OM DX Cabrillo export fixed error with received field.
| |
| New contest supported: WAEDC RTTY.
| |
| Fixed some bugs in QTC Send screen. (TNX R9IR)
| |
| | |
| Ver 2.0.20
| |
| ------------------------
| |
| New contest supported: JARTS WW RTTY Contest. (TNX 9A7R)
| |
| New contest supported: Kirov region cup. (TNX RM4N)
| |
| VGE SPRINT contest fixed according to the rules. (TNX EA4ZK)
| |
| Rate display refresh was broken when entering new qso. It was only refreshing during log scrolling. Fixed.
| |
| Fixed WAG Cabrillo import problem. (TNX DF1LX)
| |
| ARRL Sweepstakes: added prefill database. (TNX W9PA)
| |
| New contest supported: OH local contest Viitosten Syysottelu. (TNX OH6XX)
| |
| New contest supported: DARC 10m DIGITAL Contest (Corona). (TNX YT3W)
| |
| New contest supported: ARRL RTTY Roundup. (TNX YT3W)
| |
| | |
| Ver 2.0.19
| |
| ------------------------
| |
| Send spot (ALT+F3) window wasn't shown if DXCluster was disconnected but network connection was active. Fixed. (TNX NQ4I)
| |
| Partner window callsign double click and popup delete and delete all function wasn't implemented. Fixed. (TNX G4BYG)
| |
| New macro commands supported:
| |
| $SPACEBAR same as $SPACE (press spacebar in currently active field)
| |
| $CHECKCALL move focus to callsign and press spacebar
| |
| $GUESSEXCH try to guess exchange, focus stays in currently active field
| |
| $LOGQSO silently save QSO (useful in ESM + S&P mode)
| |
| $CTRLPLUS same sa $LOGQSO
| |
| $FOCUSCALL move entry focus to Callsign field
| |
| $FOCUSRCVD move entry focus to Rcvd field
| |
| $FOCUSREC1 move entry focus to RecInfo field
| |
| $FOCUSREC2 move entry focus to RecInfo2 field
| |
| $FOCUSREC3 move entry focus to RecInfo3 field
| |
| $FOCUS1 change Focused radio to Radio 1
| |
| $FOCUS2 change Focused radio to Radio 2
| |
| $SWAPFOCUS change Focused radio to opposite Radio
| |
| $GRABPARTNER grab next call from partner window into callsign field in current entry line
| |
| | |
| New bandmap properties available:
| |
| Bandmap entries added by the operator Clear log fields: Always, Never, When dupe.
| |
| Defines if log entry will be cleared or not when entry is added to bandmap manually.
| |
| Search & Pounce options
| |
| Wipe QSO Log entry will be cleared if radio frequency is changed
| |
| Populate bandmap Current log entry will be added to bandmap if radio frequency is changed
| |
| Only if callsign looks valid bandmap will be populated if callsign looks like valid callsign
| |
| Frequency change threshold defines for how many Hz radio frequency needs to be changed to activate previous function
| |
| Send spot automatically when QSO is logged
| |
| If checked, when radio is in S&P, DXC spot will be automatically send to DXC when QSO is logged.
| |
| New contest supported: EA local contest Concurso Nacional de Sufijos (CN de Sufijos)
| |
| Bugfix: Bandmap spots (list data) wasn't refreshed always when band was changed, because radio band property was changed
| |
| after event was raised. Fixed. (TNX IK2NCJ)
| |
| WAG contest: added warning messages in warning file type (see wag_warning.txt in database directory). (TNX DL8MBS)
| |
| New option available: Tools->Data entry->Enable CW Cut Numbers Translation.
| |
| When checked and if RCVD field accepts only numeric characters, RCVD field will accept A, N, T, E & U characters also.
| |
| These five characters will be translated druing QSO save procedure into: 1, 9, 0, 5 & 2. (TNX N6TV)
| |
| New contest supported: EA local contest SPRINT VGE. (TNX EA4ZK)
| |
| New window available: Operating info. Shows operating data information such as Radio1/2 mode, RUN/SP mode, TX/RX status, listening
| |
| mode status, CW WPM speed etc.
| |
| Radio1 & Radio2 WPM speed can be defined for each radio if Options->CW->Enable different R1/R2 speed is checked. Default is checked.
| |
| New text commands available:
| |
| NOSYNCCW enable different R1/R2 speed (no CW speed synchronization)
| |
| SYNCCW disable different R1/R2 speed (CW speed for R1 and R2 are synchronized)
| |
| SYNCSPEED set opposite radio CW speed to same value as focused radio CW speed
| |
| DOK database new version included. (TNX DK5TX)
| |
| | |
| Ver 2.0.18
| |
| ------------------------
| |
| Interlock New option added: "Last one wins if msg is"
| |
| If checked, this will interrupt interlocked radio tx when msg on the air is one of selected messages in
| |
| "If is/not msg" drop down items.
| |
| CQP_db.txt prefill database added in distribution. (TNX W9PA)
| |
| Callsigns from database files are now shown in Check partials and N+1 windows even if they don't exists in SCP file.
| |
| If time delimiter in regional settings was different than ":", exception was raised. Fixed to accept any delimiter. (TNX IK2NCJ)
| |
| Network partner mode is now supported.
| |
| TRC contest prefill database added. (TNX F5IN)
| |
| New option available: ESM mode change focus when LOGGEDCALL macro sent.
| |
| If checked, $SPACE macro will be activated each time when $LOGGEDCALL macro is sent and ESM mode is active.
| |
| Default is unchecked.
| |
| OmniRig com object wasn't release properly on application close. Fixed. (TNX N6TV, JG1VGX)
| |
| Some Yaesu models didn't display split mode properly in bandmap indicators. Fixed. (TNX JG1VGX)
| |
| Digi mode freq correction was wrong in case of PSK modes when LSB mode was used on radio. Fixed. (TNX DK8ZZ)
| |
| Bandmap freq display was too big when using large fonts in Windows. Fixed. (TNX 9A3XV)
| |
| Automatic RUN/SP mode switching is now available. You can enable/disable this with menu option
| |
| Tools->Data entry->Enable automatic RUN/SP selection or by text commands (AUTORSP/AUTORSPON and NOAUTORSP/AUTORSPOFF).
| |
| When enabled, it will switch DXLog to SP mode when you change frequency for more then 200 Hz from CQ frequency.
| |
| When you are back within 200 Hz of CQ frequency, you will be switched back to RUN mode.
| |
| If you change RUN/SP mode manually, this function is disabled until first message (F1..F7, INS, PLUS) isn't sent.
| |
| By default, this isn't enabled. (TNX 9A3XV)
| |
| Exchange guessing logic fixed. Now it always set field flags to unchanged when they are prefilled from previous qso or
| |
| callsign databse. (TNX N6TV)
| |
| When callsign was double clicked in bandmap or announcements window and DXLog should change frequency and mode,
| |
| order of CAT commands was wrong. Mode command should be sent before frequency command. Fixed. (TNX E77DX/OE1EMS).
| |
| RIT functions are now available from DXLog.net. SHIFT+UP, SHIFT+DOWN and SHIFT+DEL shortcuts have such functions.
| |
| SHIFT+DEL clears RIT. SHIFT+UP/DOWN moves ritoffset 10 Hz (ore one step) down and up. Please note that SHIFT+UP moves
| |
| rit offset in minus direction to work in same way as CTRL+UP which grabs first upper spot from band map (lower frequency).
| |
| $13 macro added. This will send carriage return (CR) character in digi modes.
| |
| New options available in Radio setup screen:
| |
| ICOM CI-V address: you can change default CIV address for ICOM radio here if needed.
| |
| Use radio internal DVK: if checked, DXLog.net will send command to radio to start playing prerecoder message in radio internal voice keyer.
| |
| Use CAT PTT command on phone: if checked, when mode is phone, CAT tx command will be sent to radio to start TX.
| |
| Stopping the message (escape key) when working in Advanced SO2R mode now works on the following way:
| |
| 1. If listen mode is stereo ($R1R2) when esc is pressed, listen mode will stay stereo.
| |
| 2. If listen mode is mono ($R1R1 or $R2R2) when esc is pressed, listen mode will be changed to the mode which was active at message start. (TNX N6TV)
| |
| F11/ALT+W (wipe) function was stopping REPEAT mode. Fixed. (TNX N6TV)
| |
| CTRL+G function didn't set properly active qso line when moving in the log. Fixed. (TNX N6TV)
| |
| New options available: Tools->Message editors.
| |
| Enabled SO2R scenario on the fly editor if checked and operating mode is advanced SO2R, editor for standard message (SHIFT+F key)
| |
| will show also active SO2R macro lines for radio1 and radio2, so you can edit it quickly without opening full scenario editor.
| |
| On the fly editor focus on scenario line if checked, when on the fly editor window is shown, line with focus will be radio 1 or
| |
| radio 2 scenario (depends if user pressed SHIFT+F key in when radio 1 or radio 2 has focus). If not checked, standard cw message
| |
| line will be focus. Of course, user can change focus in the editor screen by pressing on TAB SHIFT/TAB key. (TNX IK2NCJ, N6TV)
| |
| New shortcuts available:
| |
| ALT + UP/DOWN changes radio frequency for 10 Hz
| |
| SHIFT + ALT + UP/DOWN changes radio frequency for 100 Hz
| |
| Bandmap "jumping" when spot is clicked is now fixed. This was happening because frequency was set to radio object and sent to CAT.
| |
| Now, if radio object exists (cat mode is active), frequency is just send to CAT, and when received from radio, it is changed on
| |
| the screen. If CAT is not used, frequency will be just changed in bandmap.
| |
| New option available: Operating->Carrier (CTRL+T). Allows you to tune the radio.
| |
| Bug fix: COPYLOG and COPYLOGCLEAR functions were reversed. Fixed. (TNX N6TV)
| |
| Bug fix: no word space is sent between logged call and serial no, for early QSOs (1-9). (TNX N6TV)
| |
| Bug fix: CTRL+TAB/CTRL+SHIFT+TAB implementation was wrong when focus was on radio 2. (TNX N6TV)
| |
| Bug fix: ESM mode. Now sends correctly exchange when in S&P mode. (TNX N6TV)
| |
| Bug fix: old spots loaded from history file. Fixed, now loads only spots not older then 30 minutes. (TNX N6TV)
| |
| Bug fix: Check Callsign window doesn't update until you hit spacebar. Now updates immediately when match is found if auto exchange guessing is on. (TNX N6TV)
| |
| Bug fix: After logging a QSO with PLUS, that callsign didn't immediately show up in the Check Mult window on the just-logged band. Fixed. (TNX N6TV)
| |
| Bug fix: Hitting [Plus] when a QSO line is completely empty displayed red error message "Callsign needs at least one number". Fixed. (TNX N6TV)
| |
| Bug fix: F7 (sending a question mark) didn't *immediately* halt a repeating CQ. Fixed. (TNX N6TV)
| |
| Bug fix: For CQP, *Pts* column wasn't properly centered under the heading. *Stn* column also off by 1. Fixed. (TNX N6TV)
| |
| Bug fix: DB file loader didn't ignore comments. Fixed. (TNX N6TV)
| |
| Bug fix: Repeating CQ delay timer settings wasn't saved in config. Fixed. (TNX N6TV)
| |
| Time ON/OFF calculation fixed to match ARRL Sweepstakes / NAQP rules. (TNX N6TV)
| |
| Bug fix: Cursor width wasn't recalculated when log font was changed. Fixed. (TNX N6TV)
| |
| New contest supported: Ten-Meter RTTY Contest. (TNX YT3W)
| |
| New contest supported: TARA RTTY Melee Contest. (TNX YT3W)
| |
| New contest supported: NRRL Field Day. (TNX YT3W)
| |
| New contest supported: Arktika Cup. (TNX YT3W)
| |
| New option available: Options->Automatic backup. If automatic backup is enabled, it will create copy of log file at chosen location
| |
| every XX minutes. Period is chosen by user. Also, LGS formatted file can be created on same location during backup process.
| |
| Automatic backup is run in background thread, so it doesn't stop main thread from usual work. LGS file created during automatic backup
| |
| process is also created in same background thread.
| |
| New option available: File->Export->Log search format. Export currently opened log in LGS formatted file.
| |
| WAG Contest outside DL: Worked German districts window wasn't enabled. Fixed. (TNX EA5FQ)
| |
| New contest supported: Makrothen Contest. (TNX YT3W)
| |
| OK/OM Contest prefill database added. (TNX EA5FQ)
| |
| HamCAP integration implemented: CTRL+P now launch HamCAP application for callsign typed in callsign field. (TNX N6TV)
| |
| | |
| Ver 2.0.17
| |
| ------------------------
| |
| If you hold down Control key during application start, it will be possible to override some settings remembered in
| |
| application config file when application was started previous time (size, opening last log automatically etc).
| |
| "~" sign can be used in messages to concatenate multiple macro (or macro and text) in one word (without spacing between
| |
| commands or commands and some text)
| |
| New option added: Options->CW->Add spacing when stacking messages.
| |
| If checked, when you stack couple of messages during CW keying, DXLog.net will insert space character between each message
| |
| automatically. Default is unchecked.
| |
| Other standard and additional messages now can be called as macro in additional messages when keying from ALT+C screen.
| |
| If WinKeyer was enabled on port, but serial port didn't exists, exception was raised. Fixed. (TNX YT3W)
| |
| New option available: File->Clean log.
| |
| You can clean log file from qsos with yourself, Dupe qsos or remove /QRP extensions from qso.
| |
| Fixed MMVARI, MMTTY and 2Tone modes now. It should work OK for FSK and AFSK modes. (TNX W4TV).
| |
| MMTTY and/or 2Tone external process was started without setting working directory which caused a problem with
| |
| .ini file config saving in SO2R operating mode. Fixed. (TNX N6TV)
| |
| New option added: File->Export->Text file.
| |
| Log file can be exported in simple txt tab delimited file which can be used for further analysis.
| |
| FT-1000D supported added. (TNX EI3JE)
| |
| RTTY FSK mode is now supported in MMVARI decoder.
| |
| New contest supported: RSGB UKAC 6/4/2m & 70/23cms. (TNX 2E0SQL).
| |
| New options added in status window. You can show/hide some columns, as well as change sorting method. (TNX NQ4I)
| |
| New transceiver supported: TenTec Orion. (TNX NQ4I)
| |
| All bands/periods state is now remembered in each of the Worked multipliers windows. (TNX N6TV)
| |
| Radio Ant/Status window now shows also more interlock information. You can see which station is blocking you and
| |
| what message is sent on that station. In case it is manual tx request (for example footswitch requested), msg is
| |
| shown as MAN (manual). Also, if tx and interlock blocking is requested by CW/RTTY keyboard, msg will be shown as
| |
| KEYB.
| |
| Bugfix: TX/RX switching was broken when using DSR COM port switch for PTT (footswitch). Fixed now.
| |
| Number server / local number synchronization is fixed now. Successfull number reservation is now also shown in status
| |
| bar in main form.
| |
| If log is opened and File->New was clicked, active log was closed after config screen was filled. On slower computers
| |
| closing procedure wasn't handled properly and opening of new log was broken. This was changed on the way that user is
| |
| warned that log is prompted to close active log before continuing with new log creation procedure. (TNX 9A7R)
| |
| New bandmap option added: Show network stations.
| |
| If checked, network stations position will be visible in bandmap. Station ID is also shown.
| |
| ICOM CI-V protocol changed to support radio polling.
| |
| | |
| Ver 2.0.16
| |
| ------------------------
| |
| Additional space character between letters was added when using CW/RTTY keyboard (ALT+K). Fixed now. (TNX G4BYG, XE2K)
| |
| Regex checking for valid callsign/rcvd entry was added when callsign/rcvd was selected by clicking in digi mode
| |
| decoder RX window.
| |
| Improved callsign regex validation in digi mode decoder rx windows.
| |
| If worked callsign is same as callsign entered in contest config screen, QSO is automatically marked as invalid.
| |
| It will be possible to delete such qsos later with clean log option from menu.
| |
| SCP search can be started after 2nd character in callsign. Default is after 3rd character. See Check partials form,
| |
| drop down menu. (TNX N6TV)
| |
| New CW/RTTY macro commands added:
| |
| $QSOB4WIPE if qso is dupe, sends QSOB4 message and clear current qso row
| |
| $CLEARRIT clear RIT on currently active radio (works on radio which supports this command). (TNX N6TV, DF9DD)
| |
| New option added: Options->CW->Speed limits. You can set minimum or maximum CW speed. Default min = 20, max = 60 wpm. (TNX RZ3AZ)
| |
| CQ WW RTTY default message fixed for US stations (added $EXCHANGE macro). (TNX W9PA)
| |
| | |
| | |
| Ver 2.0.15
| |
| ------------------------
| |
| Network time synchronization was running when Number server was enabled. Fixed to run only
| |
| when Time synch server is running. (TNX R9IR)
| |
| Network GAB messages were shown on all network PC's, without checking destination.
| |
| Now fixed and GAB messages is shown on all PC's only if message destination is "ALL" or when client
| |
| responding to DXCluster talk message. In other cases, GAB message will be shown only on PC which
| |
| station ID is same as message destination address. (TNX 9A3ZA)
| |
| Network GAB messages are now saved by default to history file and loaded when log is opened.
| |
| User can switch this off by unchecking "Save to history file" pop-up menu option in GAB window (ALT+I)
| |
| DXC Cluster stream and DXC Spots are now saved to history files. This can be switched off in
| |
| DXC Announcements window (ALT+A) and DXC Cluster window (ALT+O).
| |
| CW Keyer stop message was delayed until next CW element was sent. Fixed. (TNX RZ3AZ, N6TV, OE1EMS, YU7RL)
| |
| When using DIGI modes, if macro message contains $LOGGEDCALL macro command and current logged qso callsign is
| |
| empty, DXLog.net automatically grabs last known (highlighted) callsign from TX/RX window. (TNX 2E0SQL)
| |
| MMVARI window was opened in BPSK mode by default, even if contest was RTTY only. Now changed so that during window
| |
| initialization new mode is set to currently active mode for radio. (TNX 2E0SQL)
| |
| When using keyboard and longer text (for example from macro) was sent, if user closed keyboard window by clicking on
| |
| X in right upper corner, TX was iddling after message was sent. Now changed on the way that TX is stopped immediately
| |
| if keyboard window is closed (by clicking X, or button). (TNX 2E0SQL)
| |
| New shortcut introduced: CTRL+PLUS now silently save QSO when ESM mode is enabled.
| |
| MMTTY RTTY decoder is now supported.
| |
| 2Tone RTTY decoder is now supported.
| |
| New options available: Secondary decoder for Radio 1 and Radio 2.
| |
| Options->RTTY configuration menu is now available.
| |
| User can choose primary/secondary decoder type for each radio. Default is MMVARI.
| |
| MMTTY / 2Tone decoders should be installed before usage.
| |
| Fixed OmniRig frequency "rounding" problem.
| |
| CW word spacing is now corrected to right values.
| |
| Options->Log menu is now shown also as context popup-menu after mouse right click in the log. (TNX N6TV)
| |
| When Alt key only was pressed, top menu was accessed. Now fixed. (TNX N6TV)
| |
| Additional CW/RTTY messages can be transmitted from editor window (ALT+C). (TNX N6TV)
| |
| Installer now remembers installation directory from previous versiona and in case of upgrade,
| |
| it will propose same installation directory. (TNX N6TV)
| |
| New contest supported: CNCW (EA local contest).
| |
| Live score mode fixed for CQ WW RTTY contest.
| |
| | |
| Ver 2.0.14
| |
| ------------------------
| |
| Live score post now option was active only when Enabled auto posting was checked. Fixed.
| |
| Fixed problem with Thread polling in WinXP systems when CW keying is running.
| |
| | |
| Ver 2.0.13
| |
| ------------------------
| |
| Fixed MMVARI baud rate was reset to default whan changing sound card selection.
| |
| Fixed "File in use" error when downloading CTY_WT_MOD.dat update. (TNX W9PA)
| |
| CQP: changed dupe calculation from band/mode to band/mode/county. (TNX N6TV)
| |
| New option added: Tools->Data entry->Exchange guessing.
| |
| User can select between 3 options:
| |
| - Pressing the space bar
| |
| - Automatically
| |
| - After timeout
| |
| CQ WW scoring for NA<->NA stations was wrong. Fixed. (TNX NQ4I)
| |
| DX Spots in network didn't propagate to clients monitoring window (ALT+O). (TNX NQ4I)
| |
| Spot station (ALT+F3) and Talk to DXC (ALT+T) are now enabled when network is enabled.
| |
| CTRL+TAB was switching RUN/SP mode always on radio 1, and CTRL+SHIFT+TAB on radio 2.
| |
| It's changed to:
| |
| CTRL+TAB switch RUN/SP mode on primary (active radio)
| |
| CTRL+SHIFT+TAB switch RUN/SP mode on secondary (inactive radio) (TNX N6TV)
| |
| Dupe info wasn't refreshed in SCP windows when double qso check mode was based on received info field. (TNX N6TV)
| |
| DXCluster talk messages are now shown in GAB window.
| |
| Talk messages can be responded in GAB window by selecting destination callsign for GAB message.
| |
| New contest supported: Polar radioman contest. (TNX 9A1AA)
| |
| New contest supported: Georgia QSO party.
| |
| New contest supported: Florida QSO party.
| |
| | |
| | |
| Ver 2.0.12
| |
| ------------------------
| |
| microHam internal DVK keyer is supported now.
| |
| SSB bargraph added. Active during recording / playing DVK messages on sound board.
| |
| Tooltips with additional informations are added on Bandmap windows. (TNX OE1EMS/E77DX)
| |
| Fixed DXCAnnouncements window double click problem. (TNX DH2WQ)
| |
| DUPE text is now shown in mult column if worked QSO is DUPE. (TNX N6TV, R9IR)
| |
| Double click on callsign at Check partials and N+1 window now grab callsign into actual QSO entry window.
| |
| New contest supported: DRCG World Wide RTTY. (TNX DM5TI)
| |
| ICOM 746 radio was ICOM 746 PRO. Renamed. (TNX SV1DOO)
| |
| New radio support added: ICOM 746.
| |
| CW timing issues. Added internal compensation factor. Should be more precise now.
| |
| Network ping message introduced. If response is not received in 30 seconds, network is restarted on client.
| |
| Sending spots (ALT+F3) was disabled when connected to other dx cluster. Fixed now. (TNX R9IR)
| |
| Adding QSO notes (ALT+N) command is now available.
| |
| BARTG SPRINT and BARTG SPRINT75 splitted in two config files.
| |
| BARTG SPRINT and BARTG SPRINT75 config corrected according to the rules.
| |
| New contest supported: TRC-DX Contest. (TNX F5IN)
| |
| New option added: Options->Interface specific configuration->Use MMVARI center frequency correction
| |
| Default is checked.
| |
| If checked DXLog.net will calculate actual frequency as frequency from radio +/ MMVARI carrier center frequency.
| |
| This corrected frequency will be used as actual bandmap frequency, dxspotting frequency and stored as frequency
| |
| where qso was made.
| |
| MMVARI new options added: Sound card RX, Sound card TX.
| |
| Allows user to choose which sound card will be used for RX and TX in each of the MMVARI Radio windows.
| |
| Default value is windows default sound card setting.
| |
| New contest supported: Wednesday mini contest. (TNX RZ3AZ)
| |
| | |
| | |
| Ver 2.0.11
| |
| ------------------------
| |
| Double click on Check callsign or Check multipliers data now immediately scrolls log to clicked qso.
| |
| Tools->Repeat loop option was broken (txt command was OK). Fixed now. (TNX DK5TX)
| |
| Redefine keys wasn't working properly when destination key included Shift modifier. Fixed now. (TNX DK5TX)
| |
| OmniRig is now supported.
| |
| ADIF import is redesigned and optimized for faster import.
| |
| The hyphen or minus key (-) quickly activates/deactivates Split mode.
| |
| Command line arguments "-n" or "--noautoload" can be specifed to override Load contest at startup option.
| |
| WAEDC contest DX side QTC sending is now enabled.
| |
| WAEDC contest added info messages for number of QTCs available/received/sent/in stock etc.
| |
| Floating windows option was broken. Now fixed. (TNX DF1LX)
| |
| Check multipliers window data was display only for MULT1 field. Now it uses first field in sequence MULT1, MULT2, MULT3
| |
| which isn't empty. (TNX DK5TX)
| |
| QTC network messages added. QTC synchronization is on and data is synchronized between stations in network.
| |
| Options->Log->Fonts->Large wasn't properly restored after log opening. Fixed. (TNX G4BYG)
| |
| | |
| Ver 2.0.10
| |
| ------------------------
| |
| Version numbering is changed as of version 2.0
| |
| Footswitch PTT function on serial port (DSR pin) is now available.
| |
| Software interlock is available now.
| |
| Number server is implemented.
| |
| Multi op band / mode change counters are available and can be defined by category in config files.
| |
| SO2R is now supported.
| |
| Fixed CW keying problem with COM port 10 and above.
| |
| UBA Contest rules changed for year 2014.
| |
| SCWC config fixed because of problems with special letters in category names when using Win8 OS. (TNX YT3W)
| |
| Tesla memorijal local YU V/U/SHF contest is now supported. (TNX YT3W)
| |
| New option added: Redefine keyboard keys (Text command: DEFINEKEYS).
| |
| New text commands added: SETUP (configure interfaces) and WRITELOG (Export cabrillo file)
| |
| GTC CW Cup Config changed: new rules for 2013.
| |
| Serial port communication is now fully moved to low level API access.
| |
| New contest supported: OK1WC Memorial HF Contest. (TNX YT3W)
| |
| New SO2R boxes supported: Microham MK2R/MK2R+/u2r. (TNX Jozef OM7ZZ from Microham).
| |
| Standard cw messages editor available.
| |
| Search and Pounce mode implemented.
| |
| User can select between Run/S&P mode with Ctrl+Tab (Radio1) or Ctrl+Shift+Tab (Radio2).
| |
| Additional cw messages available (editor + msg 1..12 with macros $MSG1..$MSG12).
| |
| Added search and pounce messages set (available in editor and SHIFT + key editor)
| |
| Sprint exchange logic implemented. (TNX N6TV).
| |
| CW Shortened spaces implemented. Can be enabled or disabled.
| |
| Country files can be selected between CTY.DAT, CTY_WT.DAT and CTY_WT_MOD.dat.
| |
| SO2R Scenarios editor implemented.
| |
| SO2R Scenarios can be used in Advanced SO2R mode.
| |
| Active scenario can be selected on menu or shortcuts (Ctrl+Alt+1..8)
| |
| Active radio, Headphones and Stereo RX mode control is now possible on serial ports.
| |
| Zoom level on bandmap is saved in and restored from configuration file.
| |
| If $CR macro exists in CW message when esc is pressed, $CR macro is executed anyway.
| |
| New option available: Options->DX Cluster->Reconnect default DXCluster at start.
| |
| BUG fix: Keyboard mode was sending spaces between each character.
| |
| The "<" and ">" keys now works as field navigation.
| |
| OK button is now default one on SETUP screen.
| |
| New text commands: REOPEN/RELOAD and REOPENNOW/RELOADNOW reopens current log
| |
| CTRL+K, CTRL+A and CTRL+E key combinations now works on entry fields.
| |
| CW speed is saved in and restored from configuration file.
| |
| CW leading zero and abbreviation settings are saved in and restored from configuration file.
| |
| Hide QSO numbers setting is now saved in and restored from configuration file.
| |
| All fields except callsign field are in overwrite mode now.
| |
| New text commands: VER/VERSION shows about screen.
| |
| Ctrl+Up, Ctrl+Shift+Up, Ctrl+Down, Ctrl+Shift+Down now navigate through bandmap.
| |
| When in repeating mode, pressing F1 while CQ is running, stops current CQ, and restarts new one
| |
| from the start.
| |
| Changed max length RecInfo field for CW Open contest to 12 characters (contest txt config file changed).
| |
| Cursor position in field is now remembered and restored while scrolling through log with up/down arrows.
| |
| Message keys F1..F7, INS and PLUS are accesible in keyboard window.
| |
| Esc key now closing keyboard window if TX isn't active.
| |
| BUG fix: there was a bug in procedure for processing cat data from Kenwood, Elecraft and some Yaesu type of radio.
| |
| The exception was not properly handled and serial port communication was immediately closed.
| |
| DXCluster Announcements window display options are now saved in and restored from configuration file.
| |
| Recent opened files list is available in File menu. Last 4 opened logs are remembered.
| |
| New option added: Options->Load contest at startup->Enabled/Disabled.
| |
| If enabled, most recent log file is automatically opened after application start. Default is disabled.
| |
| Microphone muting functions while using Sound card as DVK implemented.
| |
| Works on older Windows (XP, 2000) and newer versions (Vista, Win7 etc).
| |
| New option added: GOTO Qso (Shortcut CTRL + G). Jumps to desired QSO number in the log.
| |
| New option added: Options->CW->Remap keys in keyboard mode.
| |
| If checked, KEY remapping works when CW keyboard is active. Default is unchecked.
| |
| New option added: Options->CW->Work dupes (Text commands: WORKDUPE/WORKDUPEON, NOWORKDUPE/WORKDUPEOFF).
| |
| If work dupes is checked/activated, $QSOB4 macro doesn't send QSOB4 message if QSO is dupe.
| |
| NumLock key is now ignored as key for redefinition.
| |
| New option added: Commands->Operator login (Text commands: OPON/LOGIN, OPOFF/LOGOFF).
| |
| If operator is logged on, callsign is associated with any new qso logged.
| |
| Also, operator callsign is used for different voice memories (subdirectory is equal to logged on callsign).
| |
| New option added: Options->Interface specific options->Allow different TX/RX antenna.
| |
| If checked, TX and RX antenna can be different (selected with ALT + F11 / F12 keys).
| |
| TX/RX antenna is automatically switched before PTT ON and after PTT OFF.
| |
| Default is unchecked.
| |
| New option available in config interfaces screen: PTT Tail Delay (ms).
| |
| Network protocol is changed. DXLog.net V2.0 will run on new network protocol.
| |
| New option added: Tools->Data entry->Enable ESM mode (Text commands: ESM/ESMON, NOESM/ESMOFF).
| |
| If checked, ESM (enter sends message) is enabled. Default is unchecked.
| |
| New contest supported: RCC Fieldday.
| |
| Bug fix: when CAT interface was active on two radios, polling function was sharing same address space. Now it is
| |
| changed to run in different address spaces. (TNX N6TV)
| |
| New option added: Options->Log->Stay in field while moving up and down in the log. Default is checked.
| |
| Bandmap function: Alt->Doubleclick put frequency in opposite vfo.
| |
| Bandmap function: Ctrl->Doubleclick quickly delete desired callsign from bandmap.
| |
| New text field editing shortcuts implemented: Ctrl+B, Ctrl+D, Ctrl+F, Ctrl+W, Ctrl+K.
| |
| DXCluster monitor window (ALT+O) now shows connection name and status in titlebar.
| |
| Multi-threading functions are recorded for better internal synchronization and more stability.
| |
| New contests supported: NA Sprint, NCCC Sprint.
| |
| New text commands available: AUTORELOAD / NOAUTORELOAD (same function as Options->Load contest at startup->Enabled/Disabled)
| |
| New text commands available: CLEARLOG / CLEARLOGNOW (delete all qsos from active log file)
| |
| New text commands available: COPYLOG / COPYLOGCLEAR (copy active log file to new log file with timestamp added to name)
| |
| In case of COPYLOGCLEAR command, log is copied as empty, without any qso in it.
| |
| New option added: Edit->Delete all qso (same as CLEARLOG text command).
| |
| Export Cabrillo file now has default name same as active log file, with different extension (.log).
| |
| User can change it in dialog available before saving.
| |
| New text command available: BYE (same as EXIT / QUIT)
| |
| New text command available: NEW (same as File->New)
| |
| New text command available: OPEN (same as File->Open)
| |
| New text commands available: NET/NONET & NETON/NETOFF (enable/disable DXLog.net network communications).
| |
| New text commands available: NETCONFIG (same as Options->Configure network).
| |
| New text commands available: ILOCK/NOILOCK & ILOCKON/ILOCKOFF (enable/disable DXLog.net sw interlock).
| |
| New text commands available: CTYFILES/COUNTRYFILES (same as Options->Data files->Country files).
| |
| ICOM 746 added to the list of supported radios.
| |
| New callsign database for Serbian HF Cup (YU Local contest) is included in new release. (TNX 9A1AA)
| |
| Cabrillo import is now fixed when fields are optional or different and depending on DEST parameters.
| |
| For example. (NA Sprint, NCCC Sprint etc).
| |
| | |
| Ver 1.1.17 (20-Jun-2013)
| |
| ------------------------
| |
| Live score posting to cqcontest.net is implemented now. (TNX RW4WM)
| |
| Time ON/OFF counters implemented in rate window.
| |
| Time ON/OFF information is added to summary text info (copy as text).
| |
| Status info window is available now (shortcut ALT+J).
| |
| Network messages for status info window are implemented.
| |
| Multi/Single ten minute rule counters are available now (visible in status info window).
| |
| Station type can be selected at Commands->Station type menu.
| |
| LPT port keying was broken in previous version. Fixed now. (TNX 9A1AA)
| |
| New menu actions are available to switch antenna from software, if multiple antennas are available
| |
| for same band (Commands->Antenna selection ->Change TX / Change RX). Shortcuts ALT+F11 / ALT+F12.
| |
| Currently selected RX/TX antenna is visible in status bar. This will be moved to new window in software.
| |
| When using LPT port band data for antenna switching, currently there isn't possible to set different antena for TX/RX.
| |
| This feature will be implemented too, but need more testing because of possible relay hot switching problems.
| |
| Some contest config files are changed where live score contest name is not same as contest name for Cabrillo file.
| |
| WAG contest: default CW messages for DL stations now points to $EXCHANGE variable, and for non-DL stations to $SERIAL.
| |
| | |
| | |
| Ver 1.1.16 (12-Jun-2013)
| |
| ------------------------
| |
| Cabrillo format for Portugal day contest is now fixed. (TNX 9A1AA)
| |
| Fixed Cabrillo entry for TB-WIRES category in CQ WPX Contest. (TNX 9A6C)
| |
| New contest supported: Ukrainian DX DIGI Contest.
| |
| New contest supported: Ukrainian DX Classic RTTY Contest.
| |
| CAT protocol was broken on FT-897D. Now it is OK. (TNX 9A6SJZ)
| |
| VFO A/B selection now should work on Kenwood radio too.
| |
| Bandmap list vertical scroll doesn't reset on top position anymore when new spot is received.
| |
| New bandmap display options added (hide dupes and invalids + show multipliers only).
| |
| Clear bandmap command working now.
| |
| UR oblasts database is now included in distribution. (TNX YT3W)
| |
| EZMaster antenna matrix support is implemented.
| |
| LPT port configuration screen changed to provide band data info on LPT port pins, DVK control etc.
| |
| LPT bcd band data is implemented now. Defaults to Top-Ten Devices now, but there will be new config screen to configure pins if needed.
| |
| | |
| Ver 1.1.15 (08-Jun-2013)
| |
| ------------------------
| |
| QSO frequency can be edited now in ALT+F screen. (TNX E70T)
| |
| New contest supported: RCC Cup. (TNX YT3W)
| |
| New contest supported: Aegean RTTY Contest. (TNX YT3W)
| |
| New contest supported: DL-DX RTTY. (TNX YT3W)
| |
| New contest supported: DMC RTTY Contest. (TNX YT3W)
| |
| New contest supported: Russian «RADIO» RTTY WW Contest. (TNX YT3W)
| |
| New contest supported: Sainio CW Contest. (TNX YT3W)
| |
| New contest supported: Sainio RTTY Contest. (TNX YT3W)
| |
| New contest supported: Sainio SSB Contest. (TNX YT3W)
| |
| New contest supported: UA2 QSO Party. (TNX YT3W)
| |
| Bug fix: Helvetia contest definition double qso was calculated per band/mode, fixed to per band only. (TNX 9A1AA)
| |
| Bug fix: Cabrillo/ADIF export was broken when RST field was shorter than expected. (TNX 9A9A)
| |
| New radio supported: Yaesu FT-450.
| |
| Bandmap active VFO now tracks active vfo on radio.
| |
| Switching bandmap active vfo now sends cat command to radio to switch vfo.
| |
| New contest supported: Ukrainian Radio Sport Team Championship. (TNX YT3W)
| |
| | |
| Ver 1.1.14 (23-Apr-2013)
| |
| ------------------------
| |
| Bug fix: worked prefix display window was broken when callsign with multiple number was logged.
| |
| New macro command available: $SPACE
| |
| Worked multipliers list window was broken when QSO with unrecognized DXCC was logged. (TNX OK1RI)
| |
| Fixed some threading problems in check partials methods.
| |
| Added 24 GHz band for EU V/U/SHF contests. (TNX 9A4QV)
| |
| Fixed 50 MHz QSOs ADIF import problem when using DXPedition mode. (TNX J28AA/E70A)
| |
| WWL locator database is now included for EU V/U/SHF contests.
| |
| SCP search by recinfo value from database is now available.
| |
| | |
| Ver 1.1.13 (05-Apr-2013)
| |
| ------------------------
| |
| SPDX database included. (TNX SP5KP)
| |
| Bug fix: postcontest mode qso scrolling was broken when trying to scroll from UTC time field.
| |
| | |
| Ver 1.1.12 (29-Mar-2013)
| |
| ------------------------
| |
| Fixed Veteran (YUOTC) contest.
| |
| | |
| Ver 1.1.11 (18-Mar-2013)
| |
| ------------------------
| |
| New contest supported: Bucharesti HF International Contest.
| |
| Bug fix: Cabrillo export for CQ WPX Contest.
| |
| New contest supported: SARTG WW RTTY Contest. (TNX YT3W)
| |
| New contest supported: SARTG New Year RTTY Contest. (TNX YT3W)
| |
| | |
| Ver 1.1.10 (15-Mar-2013)
| |
| ------------------------
| |
| New contest supported: Russian Radio Team Championship. (TNX YT3W)
| |
| New contest supported: Volga Federal District Radio Team Championatship. (TNX YT3W)
| |
| New contest supported: RAC Canada Day Contest. (TNX YT3W)
| |
| New contest supported: RAC Canada Winter Contest. (TNX YT3W)
| |
| Bugfix: SCWC Contest. (TNX YT3W)
| |
| | |
| Ver 1.1.9 (14-Mar-2013)
| |
| ------------------------
| |
| New contest supported: RSGB CW National Field Day. (TNX YT3W)
| |
| New contest supported: RSGB RoPoCo Contest. (TNX YT3W)
| |
| New contest supported: RSGB First 1.8MHz Contest. (TNX YT3W)
| |
| New contest supported: RSGB Second 1.8MHz Contest. (TNX YT3W)
| |
| New contest supported: PODXS Ø7Ø Club PSKFest. (TNX YT3W)
| |
| New contest supported: PGA Test. (TNX YT3W)
| |
| New contest supported: PGA-DIGI. (TNX YT3W)
| |
| New contest supported: Polska WW BPSK63 Contest. (TNX YT3W)
| |
| New contest supported: Yuri Gagarin International DX Contest. (TNX YT3W)
| |
| New contest supported: PODXS 31 Flavors Contest. (TNX YT3W)
| |
| New contest supported: PODXS 40 Meter Firecracker Sprint. (TNX YT3W)
| |
| New contest supported: PODXS 80 Meter Jay Hudak Memorial Sprint. (TNX YT3W)
| |
| New contest supported: PODXS 160 Meter Great Pumpkin Sprint. (TNX YT3W)
| |
| New contest supported: PODXS Valentine Sprint. (TNX YT3W)
| |
| New contest supported: Goes hunting for wolves. (TNX YT3W)
| |
| New contest supported: RSGB Affiliated Societies Contests. (TNX YT3W)
| |
| New contest supported: RSGB Low Power Contest. (TNX YT3W)
| |
| New contest supported: RSGB SSB Field Day. (TNX YT3W)
| |
| New contest supported: RSGB 80m Sprint Contest. (TNX YT3W)
| |
| New contest supported: RSGB Club Calls Contest (1.8MHz AFS). (TNX YT3W)
| |
| New contest supported: Open Ukraine RTTY Championship. (TNX YT3W)
| |
| New contest supported: Ural Cup. (TNX YT3W)
| |
| YAESU FT-897 CAT communication supported.
| |
| | |
| Ver 1.1.8 (19-Feb-2013)
| |
| ------------------------
| |
| New contest supported: EPC Ukraine DX Contest. (TNX YT3W)
| |
| New contest supported: UK DX BPSK63 Contest. (TNX YT3W)
| |
| New contest supported: CIS DX PSK Contest. (TNX YT3W)
| |
| New contest supported: IOTA Contest. (TNX YT3W)
| |
| ICOM IC-7410 CAT communication supported.
| |
| | |
| Ver 1.1.7 (15-Feb-2013)
| |
| ------------------------
| |
| New contest supported: British Columbia QSO Party (BCQP). (TNX YT3W)
| |
| New contest supported: AGCW YL-CW Party. (TNX YT3W)
| |
| New contest supported: KCJ TOPBAND Contest. (TNX YT3W)
| |
| New contest supported: KCJ Contest. (TNX YT3W)
| |
| New contest supported: Asia Pacific Sprint Contest.
| |
| New contest supported: RSGB 80m Club Championship. (TNX YT3W)
| |
| New contest supported: Holyland Contest. (TNX YT3W)
| |
| New contest supported: Russian WW PSK Contest. (TNX YT3W)
| |
| New contest supported: EPC Russia DX Contest. (TNX YT3W)
| |
| New contest supported: EU PSK DX Contest. (TNX YT3W)
| |
| New contest supported: Sumadija PSK. (TNX YT3W)
| |
| Fixed HQ stations calculation in BSCI contest. (TNX 9A1AA)
| |
| | |
| Ver 1.1.6 (01-Feb-2013)
| |
| ------------------------
| |
| New contest supported: CQ-WE (Western Electric) Contest. (TNX YT3W)
| |
| Multiple custom multiplier lists windows are available now.
| |
| Fixed CW keyer problem when cw message is defined as single macro.
| |
| | |
| Ver 1.1.5 (30-Jan-2013)
| |
| ------------------------
| |
| New contest supported: Triathlon DX contest. (TNX YT3W)
| |
| New contest supported: International NAVAL Contest. (TNX YT3W)
| |
| New contest supported: NAQP North American QSO Party. (TNX YT3W)
| |
| New contest supported: YO International PSK31 Contest. (TNX YT3W)
| |
| New contest supported: ARRL Sweepstakes. (TNX YT3W).
| |
| New contest supported: Black Sea Cup International (BSCI).
| |
| DXCluster connection code is now redesigned for more stability.
| |
| Serial port keying now working with access to serial port on WIN API level,
| |
| because of more accurate keying, problems with some USB->RS232 serial converters etc.
| |
| | |
| Ver 1.1.4 (17-Jan-2013)
| |
| ------------------------
| |
| New contest supported: DTC German Telegraphy Contest. (TNX YT3W)
| |
| New contest supported: Marconi Memorial HF. (TNX YT3W)
| |
| New contest supported: EUCW Fraternizing CW QSO Party. (TNX YT3W)
| |
| New contest supported: BARTG RTTY SPRINT & SPRINT 75 Contest. (TNX YT3W)
| |
| New contest supported: BARTG RTTY SPRINT 75 Contest. (TNX YT3W)
| |
| New contest supported: BARTG HF RTTY Contest. (TNX YT3W)
| |
| New contest supported: Baltic contest. (TNX YT3W)
| |
| New contest supported: PACC. (TNX YT3W)
| |
| New contest supported: EA PSK63 Contest. (TNX YT3W)
| |
| New contest supported: EA RTTY Contest. (TNX YT3W)
| |
| New contest supported: Russian DX contest. (TNX YT3W)
| |
| DARC 10m fixed invalid multiplier error.
| |
| DOK database is now in valid format.
| |
| MMVARI RX window now recognizes callsigns, multipliers, dupes etc.
| |
| Implemented TX/RX switching when using digital modes.
| |
| More bug fixes regarding mode reading when using CAT and MMVARI.
| |
| | |
| Ver 1.1.3 (10-Jan-2013)
| |
| ------------------------
| |
| New contest supported: CQMM DX (CQ Manchester Mineira DX) Contest. (TNX YT3W)
| |
| New contest supported: AGCWDL-QRP. (TNX YT3W)
| |
| BUG fix: parsing of some custom fx was broken due wrong culture info.
| |
| New config field available: Operator name (OPNAME).
| |
| Digital modes with MMVARI (author JE3HHT MM HAM SOFT) engine supported and included in distribution.
| |
| New contest supported: EPC WW DX Contest. (TNX YT3W)
| |
| YU KT Maraton new rules supported. (TNX YT3W)
| |
| | |
| Ver 1.1.2 (07-Jan-2013)
| |
| ------------------------
| |
| New contest supported: ARRL 10m Contest. (TNX YT3W)
| |
| New contest supported: Japan International DX Contest. (TNX YT3W)
| |
| New contest supported: SP DX Contest. (TNX YT3W)
| |
| New contest supported: 9KCC 15m Contest. (TNX YT3W)
| |
| New contest supported: Helvetia Contest.
| |
| New contest supported: ES Open Contest.
| |
| New contest supported: WW PMC Contest.
| |
| New contest supported: OK DX RTTY Contest. (TNX YT3W)
| |
| New contest supported: QRP-QRP Party (by AGCW-DL). (TNX YT3W)
| |
| BUG fix: score summary display by mode was broken.
| |
| BUG fix: custom multiplier list width was wrong when mult group was visible.
| |
| | |
| Ver 1.1.1 (03-Jan-2013)
| |
| ------------------------
| |
| New contest supported: DARC 10m Contest.
| |
| New contest supported: LZ Open Contest.
| |
| New contest supported: Hungarian DX Contest.
| |
| New contest supported: CQ WW 160-Meter Contest.
| |
| New contest supported: REF Contest.
| |
| Changed extension for DXLog log files from .dxl to .dxn because of collision with DX4WIN software
| |
| (file open still allows to open old extension, but in new log creation there is only .dxn extension allowed)
| |
| BUG fix: letters on clock window was overlapped when using bigger fonts. (TNX 9A6SJZ)
| |
| | |
| Ver 1.1.0 (02-Jan-2013)
| |
| ------------------------
| |
| Fixed some problems with ARRL DX contest definition.
| |
| Added startup splash screen.
| |
| New fonts are now embedded with application.
| |
| Fixed problems with true type font errors during the exit from application.
| |
| Networking: fixed some problems with socket exception errors.
| |
| Networking: contest checking is now implemented when establishing connection.
| |
| Networking: CW message synchronization can be initiated on network now.
| |
| Networking: QSO logging can be disabled on some PC when in network. Instead of saving QSO, callsign is added to bandmap.
| |
| New contest supported: EU CW 160m QSO party.
| |
| | |
| Ver 1.0.52 (22-Dec-2012)
| |
| ------------------------
| |
| New contest supported: AGB Party. (TNX YT3W)
| |
| New contest supported: ARI DX. (TNX YT3W)
| |
| New contest supported: ARRL DX. (TNX YT3W)
| |
| New contest supported: CQ WPX RTTY. (TNX YT3W)
| |
| New contest supported: HSC. (TNX YT3W)
| |
| New contest supported: NRAU. (TNX YT3W)
| |
| New contest supported: VU DX. (TNX YT3W)
| |
| New contest supported: CQ-M. (TNX YT3W)
| |
| New contest supported: UBA. (TNX YT3W)
| |
| New contest supported: Stew Perry Top Band Distance Challenge.
| |
| BUG fix: DXCC_DB_TYPE / DXCC_DB_FILENAME wasn't read from config file, it was hardcoded to CTY + CTY.dat. (TNX YT3W)
| |
| BUG fix: Russian 160m contest R1AN* station points calculation. (TNX YT3W)
| |
| Custom multiplier grouping is available now in config file.
| |
| | |
| | |
| Ver 1.0.51 (14-Dec-2012)
| |
| ------------------------
| |
| Russian 160m contest fixed R1AN calculation.
| |
| New config function added: RGX_GUESS_DB. Now regex can be used for guessing exchange for not worked stations.
| |
| For example: database is now implemented for Russian oblasts.
| |
| | |
| Ver 1.0.50 (14-Dec-2012)
| |
| ------------------------
| |
| Added CQ repeat loop function. This can be activated in Options->CW->Repeat loop menu or
| |
| with text command RPT (deactivated with NORPT txt command or click in menu option).
| |
| Repeat loop active status is visible at bottom of Rate window.
| |
| New contest supported: Russian 160m contest.
| |
| | |
| Ver 1.0.49 (13-Dec-2012)
| |
| ------------------------
| |
| WinKeyer initialization was broken in previous version. Now fixed. TNX 9A2HM.
| |
| | |
| Ver 1.0.48 (13-Dec-2012)
| |
| ------------------------
| |
| Fixed prefix multiplier list window display.
| |
| Fixed Cabrillo contest name for TAC contest. (TNX YT3W)
| |
| Added grouping for different contest type in contest selection combo.
| |
| New contest supported: AGCW HNY. (TNX YT3W)
| |
| New contest supported: 21 Decembar. (TNX YT3W)
| |
| WinKeyer supported.
| |
| | |
| Ver 1.0.47 (04-Dec-2012)
| |
| ------------------------
| |
| Fixed some bug in CAT frequency reading when bandmap spot is clicked.
| |
| CQ frequency is now marked on bandmap.
| |
| ALT+F4 returns to CQ frequency.
| |
| | |
| Ver 1.0.46 (02-Dec-2012)
| |
| ------------------------
| |
| Fixed mult calculation by band for TAC contest. (TNX 9A1AA)
| |
| Bandmap list is now scrollable.
| |
| Bandmap is clickable now.
| |
| | |
| Ver 1.0.45 (01-Dec-2012)
| |
| ------------------------
| |
| New contest supported: TAC
| |
| | |
| Ver 1.0.44 (03-Nov-2012)
| |
| ------------------------
| |
| New contest supported: Ukrainian DX Contest (URDXC).
| |
| | |
| Ver 1.0.43 (18-Oct-2012)
| |
| ------------------------
| |
| New contest supported: Worked All Germany (WAG).
| |
| New contest supported: OK/OM DX Contest.
| |
| Cabrillo export fixed in case of wrong mode from CAT. TNX 9A6SJZ.
| |
| Bandmap is now implemented (list + regular bandmap layout)
| |
| Database file checking now working also for multiplier determination for
| |
| spots received from DX cluster.
| |
| | |
| Ver 1.0.42 (02-Oct-2012)
| |
| ------------------------
| |
| Default window/configuration settings are saved when log is closed. They are used for defaults
| |
| when new log is created.
| |
| GTC contest definition is now fixed. TNX SV5DKL.
| |
| Added GTC members database. TNX 9A1AA.
| |
| | |
| Ver 1.0.41 (20-Aug-2012)
| |
| ------------------------
| |
| Fixed DXC info display when points are based on distance (V/U/SHF contest).
| |
| Fixed Cabrillo output for IARU HFC contest. TNX 9A2TE.
| |
| Add support for VHF/UHF bands in new dxpedition mode. TNX 9A6NDD.
| |
| | |
| Ver 1.0.40 (18-Jun-2012)
| |
| ------------------------
| |
| Fixed some bugs in Cabrillo import process.
| |
| GTC CUP rules changed, according to new rules. TNX SV5DKL.
| |
| New contest supported: His Majesty The King of Spain.
| |
| Fixed CAT initialization problem with FT-847. TNX DL5SWB.
| |
| | |
| Ver 1.0.39 (08-Jun-2012)
| |
| ------------------------
| |
| New contest supported: Portugal day contest.
| |
| New contest supported: WWSA GACW.
| |
| | |
| Ver 1.0.38 (08-Jun-2012)
| |
| ------------------------
| |
| New contest supported: UNDXC.
| |
| New contest supported: EURO 2012 QSO Party.
| |
| New contest supported: EU FF Green QSO party.
| |
| | |
| | |
| Ver 1.0.34 (17-Nov-2011)
| |
| ------------------------
| |
| New contest supported: LZ DX.
| |
| New contest supported: Sumadija. TNX YT3W.
| |
| | |
| | |
| Ver 1.0.33 (30-Sep-2011)
| |
| ------------------------
| |
| Fixed CW generating problems (now complete running on performance counters)
| |
| MMTTY integrated with DXLog.net for RTTY contests (this is still in testing phase)
| |
| New contest supported: CQ WW RTTY
| |
| Bug fix: page up scrolling was broken when scroll starts from previous qso line
| |
| It's possible to import QSO's from ADIF log file (when current log is opened)
| |
| | |
| Ver 1.0.32 (21-Sep-2011)
| |
| ------------------------
| |
| Fixed distance (QRB) calculation formula. TNX 9A2HM, 9A2MI & 9A6C.
| |
| Fixed EDI export CW mode. TNX 9A6C, 9A2HI
| |
| Network protocol v1.0 is included now.
| |
| QSO rate statistics added.
| |
| Moved to performance counters for CW timing calculations instead of multimedia timers
| |
| because of higher accuracy.
| |
| New contest support: First Greek Telegraphy Club CW Cup.
| |
| Bug fix: final score calculation for KTKS contest now works OK. TNX YT3W.
| |
| Bug fix: bandmap / dxcluster now doesn't change active qso period.
| |
| Period up/down shortcuts are changed to CTRL+F10/F11, because statistics window shortcut is CTRL+F9.
| |
| | |
| Ver 1.0.31 (07-Sep-2011)
| |
| ------------------------
| |
| INVALID QSO message fixed for VHF/UHF/SHF contest. TNX 9A9L.
| |
| New contest support: California QSO party (CQP).
| |
| New contest support: Oceania DX.
| |
| New contest support: EU Sprint.
| |
| New contest support: Scandinavian Activity Contest (SAC).
| |
| Added N+1 check partials support.
| |
| Added bandmap / dxc properties editing form.
| |
| New config option to remove decimal points in avg point calculation.
| |
| Added ODX data on rate window (for VHF/UHF/SHF contests). TNX 9A6C.
| |
| Mode field can be visible in qso list form (enabled by default for VHF/UHF/SHF contests).
| |
| | |
| Ver 1.0.30 (26-Aug-2011)
| |
| ------------------------
| |
| $CORRECT CW macro now sends corrected call sign.
| |
| Text color changes now work OK in rate window.
| |
| Alt+F3 now sends DX spot to cluster.
| |
| Added Copy to text option on Summary window context menu.
| |
| Added Copy to text option on Worked DXCC window context menu.
| |
| Added YU DX contest support. TNX YT3W.
| |
| DXLog.net windows can be independent of main window. TNX YT3W & YU1LM.
| |
| New contest support: IARU Region 1 Fieldday (DARC rules).
| |
| DXC Announcements and bandmap windows now resize OK with bigger fonts. TNX 9A1AA.
| |
| DXC Announcements modify/delete functions now works OK.
| |
| Fixed points column width on log screen (last digit wasn't visible when QRB was 1000 km or more). TNX 9A6C.
| |
| Frequency marker added and activated on bandmap window.
| |
| | |
| ver 1.0.29 (15-Aug-2011)
| |
| ------------------------
| |
| Fixed ADIF export bug. TNX 9A1AA.
| |
| | |
| ver 1.0.28 (15-Aug-2011)
| |
| ------------------------
| |
| New contests supported: RDA Contest, YO DX HF Contest, CW Ops CWT, All Asian
| |
| Improved CW sound monitor.
| |
| New contest databases handling added into contest config files.
| |
| Moved on WIX installation script instead of Install Shield LE.
| |
| | |
| ver 1.0.27 (14-Aug-2011)
| |
| ------------------------
| |
| Fixed problems with decimal signs in frequency from CAT. TNX 9A1AA.
| |
| New radios supported: Yaesu FT-847, Yaesu FT-857D, Yaesu FT-2000. TNX YT3W.
| |
| | |
| ver 1.0.25 (13-Aug-2011)
| |
| ------------------------
| |
| New contests supported: WAE DX, CW Ops CW Open.
| |
| Fixed some bugs with QTC entries.
| |
| | |
| ==Register==
| |
| | |
| To register your copy of DXLog.net and to unlock full version functionality you have to go at http://www.dxlog.net website.
| |
| From main menu, click on "Licence Key" link.
| |
| After entering all details needed and confirmed, you will receive registration key on your email.
| |
| In DXLog.net, go to Help->Register menu and fill registration details:
| |
| - username of registered user (usually first and last name),
| |
| - callsign of registered user
| |
| - license key (the key you've received by email during registration process)
| |
| Be careful when entering this data because they have to be exactly same as the data you've used in registration process.
| |
| | |
| Your license key is valid for one year.
| |
| During that period, you can upgrade existing installations with newer versions.
| |
| | |
| After this one year period is expired, existing version of DXLog.net will continue to work with full functionality.
| |
| It wouldn't be possible to upgrade to newer version with expired license key.
| |
| | |
| You can use same license key on all your computers and registered callsign doesn't need to be the same as the callsign you're using in the contest.
| |
